Newsroom About Terasic Products Turnkey Solutions Training FAQ
Cart
 
   
   





Cyclone V

OpenVINO Starter Kit Set
  • Bundled with Terasic OpenVINO Starter Kit and Intel IoT Dev. Kit (UP2)
  • Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
  • Ideal coding environment for OpenVINO developer as standalone system

Terasic SoC System on Module Evaluation KIT
  • SoC System on Module
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)

OpenVINO Starter Kit
  • Cyclone V GT/GX PCIe Board, 301K LE, PCIe
  • 1GB DDR3, 64MB SDRAM, EPCQ256
  • UART-to-USB, GPIO and Arduino Headers

ADC-SoC
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • On-board two high speed A/D conveters
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

VEEK-MT2S
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
  • 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror

DE10-Standard
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
  • HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
  • Support Linux BSP and openCL BSP

VEEK-MT2-C5SoC
  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • 8-Megapixel Digital Image Sensor Module with auto focus
  • 7" LCD Touch Screen Module with 5 point touch
  • Accelerometer, Gyroscope, Magnetometer, Ambient Sensor

DE10-Nano Kit
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

DE0-Nano-SoC Kit/Atlas-SoC Kit
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

DE0-CV Board
  • Cyclone V 5CEBA4F23C7N Device
  • 4-bit Resistor VGA
  • Provides SPI and 4-bit SD mode for SD Card access
  • Serial Configuration device – EPCS64
  • 64MB SDRAM, x16 bits data bus
  • On-Board USB Blaster (Normal type B USB)

DE1-SoC-MTL2
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
  • Touch & LCD Spec

DE1-SoC Board
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

SoCKit - the Development Kit for New SoC Device
  • Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
  • 2GB DDR3, 128MB QSPI Flash, EPCQ256
  • SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC

Cyclone V GX Starter Kit
  • Cyclone V GX 5CGXFC5C6F27C7N  Device
  • LPDDR2, SRAM, FLASH EPCQ256
  • Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX

Cyclone V SoC Development Kit and SoC Embedded Design Suite
  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • Hard processor system (HPS)
  • DDR3, QSPI Flash, Micro-SD Card

Cyclone V GT FPGA Development Kit
  • FPGA prototyping
  • FPGA power measurement
  • Transceiver I/O performance up to 5.0 Gbps
  • PCI Express® (PCIe® ) Gen2 x4 (at 5.0 Gbps per lane)
  • Endpoint or rootport support

Altera Cyclone V E FPGA Development Kit
  • Cyclone V E FPGA - 5CEFA7F31I7N
  • DDR3 x32 at 300 MHz (soft memory controller)
  • On-board USB-BlasterTM II cable (USB, PHY, Max® V CPLD)
Newsroom | About Terasic | Products | Turnkey Solutions | Training | FAQ | Contact Us | Subscribe | Facebook | YouTube