• FPGA: A5ED065BB32AE4SR0 (Agilex 5 E-Series Device Group B)
• Module Size : 75mm x 75mm
• 102 HVIO (3.3V x4, 1.8/2.5/3.3 x98)
• 143 HSIO (71 LVDS)
• 48 HPSIO
• 24 Transceivers
• Interface: Two SEAM8 Connectors (4x100 pin)
• Board Management System
  • Power and Temperature Monitor
  • Auto Fan Control
  • Auto shutdown when power or temperature is abnormal

• Agilex 5 SoC with Quar-core ARM Cortext A55 and A76
• FPGA: SDRAM, DDR4, HDMI Out, MIPI, Video-In, ADC Header, GPIO/HSMC Headers
• HPS: DDR4, USB Host, MicroSD Socket, Ethernet, RTC, GPIO Header

• Intel^® Agilex^® 5 E-Series with 656K LEs and HPS includes Dual Core A55 + Dual Core A76
• HPC FMC+, 2x20 GPIO and 2x6 TMD connector (one each for expansion)
• One 2.5 G Ethernet, HDMI output, two 2-lane MIPI, one QSFP+ and PCIe cabling Gen 3 x4 socket 

• Intel Agilex^® 7 SoC FPGA I-Series AGIB027R29A1E2V
• Two QSFP-DD Ports and Two MCIO 8x Connectors
• Four Independent DDR4 SODIMM
• HPS System inclues pheriperal DDR4, SD card, UART, USB, Ethernet
• Supports PCIe, CXL

• Intel Agilex 7 SoC FPGA F-series AGFB027R24C2E2V
• QSFP28 port and FMC+ expansion connector
• Two independent DDR4 banks
• HPS system includes pheriperal DDR4, SD card, UART and Ethernet
• PCIe Gen4 x8

• Intel Agilex^® SoC Standalone Module with onboard USB-Blaster II
• FMC+ and FMC connectors for expansion 
• Support two independent 32GB DDR4 with ECC and one on-board QSFP28 connector
• Ideal for Prototyping, Industrial Control System

The Intel Agilex^® 7 FPGA F-Series Transceiver-SoC development kit offers a complete design environment that includes hardware and software for developing Intel Agilex^® 7 FPGA F-Series designs. This kit is recommended for developing custom Arm processor-based SoC designs and evaluating transceiver performance.

• Stratix 10 1SX110HN3F43I2VG
• 32-pairs 12.5 Gbps Transceivers TX/RX
• 154 LVDS
• Dual 4GB 64-bit DDR4
• USB 3.1
• QSPI Flash and eMMC
• HPS Subsystem
• Power by 12V
• 98 mm x 86mm
• Interface: FMC+ Connector x2

• Intel Stratix 10 SoC Standalone Module with onboard USB-Blaster II
• FMC+ and FMC connectors for expansion 
• Support two independent 32GB DDR4 with ECC. 
• Ideal for Prototyping, Industrial Control System, Military and Aerospace

• 1SX280HU2F50 Intel^® Stratix^® 10 SoC FPGA
• One HiLo DDR4 memory card (4GB)
• One DDR4 SODIMM memory card (16GB dual rank)
• Two HPS peripheral daughter cards (OOBE and NAND)
• Two FMC loopback cards supporting transceiver, LVDS and single-ended I/Os
• Two quad small-form-factor pluggable (QSFP28) and one SFP+ port
• Two FMC+ low-pin count (LPC + 15 transceivers) connector
• One SFP+ interface
• PCIe x16 edge connector (via cable - not included)

• Intel Stratix 10 GX/SX FPGA
• Four QSFP28(100GbE) connectors and one PCI Express (PCIe) x16 edge connector
• Four independent DDR4 SODIMM sockets (work with DDR4/QDR-II+/QDR-IV)

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• Wi-Fi, using ESP-WROOM-02 module
• Bluetooth SPP, using HC-05 module, up to 10 meter range
• Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• Wi-Fi, using ESP-WROOM-02 module
• Bluetooth SPP, using HC-05 module, up to 10 meter range
• Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

• SoC System on Module
• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• On-board two high speed A/D conveters
• 1GB DDR3 SDRAM (32-bit data bus)(HPS)
• Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 and 64MB SDRAM
• VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
• 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
• HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
• Support Linux BSP and openCL BSP

• Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
• 8-Megapixel Digital Image Sensor Module with auto focus
• 7" LCD Touch Screen Module with 5 point touch
• Accelerometer, Gyroscope, Magnetometer, Ambient Sensor

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 SDRAM (32-bit data bus)(HPS)
• Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 and 64MB SDRAM
• VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
• Touch & LCD Spec

• Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
• 1GB DDR3 and 64MB SDRAM
• VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

• Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
• Hard processor system (HPS)
• DDR3, QSPI Flash, Micro-SD Card

• Arria 10 SoC with Dual-core ARM Cortex-A9
• DDR4, HDMI, FMC, PCIe, SATA, Ethernet, Flash, USB, etc.
• Type-C USB 3.1 Gen1 and DisplayPort Altenate Mode
• Support Linux BSP

• Evaluate Intel^® Arria^® 10 SoC device features and performance.
• Begin development of your hardware and software design.
• Use as a platform for target reference designs, OS/BSP, and tools.