Bingxia: Created page with "This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD. *Dow..."

2018-09-03T05:54:11Z

Created page with "This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD. *Dow..."

New page

This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD.
*Download the BSP image file from http://de10-advanced.terasic.com/cd
*Create a Linux booting microSD card by using Win32 Disk Imager utility to write the image file into a microSD card
*Insert the microSD to microSD socket on the DE10-Advanced
*Make sure MSEL[2:0] switch on DE10-Advanced is set to proper position
*For VNC mode:
:*Connect your host PC to USB-to-Serial port(J27) on DE10-Advanced via a USB cable
:*Launch the Putty software in your PC
:*The booting message will appear on the Putty terminal
:*In host PC, use vnc client to connect to DE10-Advanced
*For HDMI mode:
:*Connect a HDMI monitor, an USB keyboard, and a USB mouse to the DE10-Advanced with USB Hub
:*Power on DE10-Advanced
:*The LXDE Desktop will appear on the HDMI monitor

'''[[DE10-Advance_Demonstration_Manual_revC#Chapter 6 Linux BSP|Back]]'''

DE10 Advance revC demo: Use Linux BSP - Revision history

Bingxia: Created page with "This section describes the procedure to boot Linux on DE10-Advanced Board. For more details, refer to chapter 5 of DE10-Advanced_Getting_Started_Guide.pdf in the System CD. *Dow..."