Full Mode - Revision history

Wyzhou at 09:08, 17 April 2017

2017-04-17T09:08:46Z

← Older revision		Revision as of 09:08, 17 April 2017
Line 1:		Line 1:
	''' How to make CLR daughter card to support the full mode '''<br/>		''' How to make CLR daughter card to support the full mode '''<br/>
-	== First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode. ==	+	* First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.
-		+
-	~~== Second, equip some neccessary ICs into the board for the full mode:==~~	+

		+	* Second, equip some neccessary ICs into the board for the full mode:
	[[File:CLR_FULL.png]]		[[File:CLR_FULL.png]]

	: We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).		: We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).

Wyzhou at 09:08, 17 April 2017

2017-04-17T09:08:11Z

← Older revision		Revision as of 09:08, 17 April 2017
Line 1:		Line 1:
	''' How to make CLR daughter card to support the full mode '''<br/>		''' How to make CLR daughter card to support the full mode '''<br/>
-	# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.	+	== First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode. ==

-	## Second, equip some neccessary ICs into the board for the full mode:	+	== Second, equip some neccessary ICs into the board for the full mode:==

	[[File:CLR_FULL.png]]		[[File:CLR_FULL.png]]

	: We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).		: We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).

Wyzhou at 09:06, 17 April 2017

2017-04-17T09:06:46Z

← Older revision		Revision as of 09:06, 17 April 2017
Line 2:		Line 2:
	# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.		# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.

-	# Second, equip some neccessary ICs into the board for the full mode:	+	## Second, equip some neccessary ICs into the board for the full mode:

	[[File:CLR_FULL.png]]		[[File:CLR_FULL.png]]

-	# We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).	+	: We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).

Wyzhou at 09:05, 17 April 2017

2017-04-17T09:05:44Z

← Older revision		Revision as of 09:05, 17 April 2017
Line 1:		Line 1:
-	! ''' How to make CLR daughter card to support the full mode '''<br/>	+	''' How to make CLR daughter card to support the full mode '''<br/>
	# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.		# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.

-	Second, equip some neccessary ICs into the board for the full mode:	+	# Second, equip some neccessary ICs into the board for the full mode:

	[[File:CLR_FULL.png]]		[[File:CLR_FULL.png]]
		+
		+	# We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).

Wyzhou: Created page with "! ''' How to make CLR daughter card to support the full mode '''
# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are..."

2017-04-17T09:03:51Z

Created page with "! ''' How to make CLR daughter card to support the full mode '''<br/> # First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are..."

New page

! ''' How to make CLR daughter card to support the full mode '''<br/>
# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.

Second, equip some neccessary ICs into the board for the full mode:

[[File:CLR_FULL.png]]

Full Mode - Revision history

Wyzhou at 09:08, 17 April 2017

Wyzhou at 09:08, 17 April 2017

Wyzhou at 09:06, 17 April 2017

Wyzhou at 09:05, 17 April 2017

Wyzhou: Created page with "! ''' How to make CLR daughter card to support the full mode ''' # First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are..."

Wyzhou: Created page with "! ''' How to make CLR daughter card to support the full mode '''
# First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are..."