《运行DE10-Pro OpenCL 报错 》
From Terasic Wiki
(Difference between revisions)
| Line 6: | Line 6: | ||
| - | ''OpenCL 19.1 BSP 中更新后，此问题已经解决！''''' | + | '''''OpenCL 19.1 BSP 中更新后，此问题已经解决！''''' |
| - | + | ||
| - | + | ||
[[DE10-Pro FAQ | back]] | [[DE10-Pro FAQ | back]] | ||
Revision as of 16:14, 20 August 2019
运行DE10-Pro OpenCL 19.1 报错 " Program was complied for different board-aocx is for board s10_sh2e1_4Gx2 whereas device is s10_sh2e1"
解决方法：将vector_add编译出来的top.sof替换DE10_Pro_OpenCL_BSP_19.1\de10_pro\bringup\s10_sh2e1_4Gx2里面的top.sof文件，然后重新配置（用bring up 重新烧写或固化）即可，需重新编译hello_world，替换bringup\s10_sh2e1_4Gx2下的hello_world.aocx。
OpenCL 19.1 BSP 中更新后，此问题已经解决！
