TSoM eMMC Programming Guide
From Terasic Wiki
(Difference between revisions)
(→1.1 Before Programming Begins) |
(→1.1 Re-flash linux image to emmc memory) |
||
| Line 3: | Line 3: | ||
= <span style="color:#000080;">1.1 Re-flash linux image to emmc memory</span> = | = <span style="color:#000080;">1.1 Re-flash linux image to emmc memory</span> = | ||
| + | |||
| + | #Prepare a Micro SD card (minimum 4GB capacity) for Linux boot. | ||
| + | #Download the image file form the below link: | ||
| + | #: ftp://terasic_china@ftp.terasic.com.tw/Image/TSOM/tsom_linux_console.zip | ||
Revision as of 17:06, 16 May 2019
This guide will show you how to program the Linux image into the eMMC device on the TSoM module and explain how to update device tree and zImage in the eMMC device.
1.1 Re-flash linux image to emmc memory
- Prepare a Micro SD card (minimum 4GB capacity) for Linux boot.
- Download the image file form the below link:
