《运行DE10-Pro OpenCL 报错 》
From Terasic Wiki
(Difference between revisions)
(Created page with "'''运行DE10-Pro OpenCL 报错 " Program was complied for different board-aocx is for board s10_sh2e1_4Gx2 whereas device is s10_sh2e1" ''' File:Error_s10_sh2e1.jpg '''解...") |
|||
| Line 1: | Line 1: | ||
'''运行DE10-Pro OpenCL 报错 " Program was complied for different board-aocx is for board s10_sh2e1_4Gx2 whereas device is s10_sh2e1" ''' | '''运行DE10-Pro OpenCL 报错 " Program was complied for different board-aocx is for board s10_sh2e1_4Gx2 whereas device is s10_sh2e1" ''' | ||
| + | |||
[[File:Error_s10_sh2e1.jpg]] | [[File:Error_s10_sh2e1.jpg]] | ||
'''解决方法：将vector_add编译出来的top.sof替换DE10_Pro_OpenCL_BSP_19.1\de10_pro\bringup\s10_sh2e1_4Gx2里面的top.sof文件，然后重新配置下（用bring up 重新烧写或固化）即可，需重新编译hello_world，替换bringup\s10_sh2e1_4Gx2下的hello_world.aocx。 | '''解决方法：将vector_add编译出来的top.sof替换DE10_Pro_OpenCL_BSP_19.1\de10_pro\bringup\s10_sh2e1_4Gx2里面的top.sof文件，然后重新配置下（用bring up 重新烧写或固化）即可，需重新编译hello_world，替换bringup\s10_sh2e1_4Gx2下的hello_world.aocx。 | ||
Revision as of 14:16, 12 August 2019
运行DE10-Pro OpenCL 报错 " Program was complied for different board-aocx is for board s10_sh2e1_4Gx2 whereas device is s10_sh2e1"
解决方法：将vector_add编译出来的top.sof替换DE10_Pro_OpenCL_BSP_19.1\de10_pro\bringup\s10_sh2e1_4Gx2里面的top.sof文件，然后重新配置下（用bring up 重新烧写或固化）即可，需重新编译hello_world，替换bringup\s10_sh2e1_4Gx2下的hello_world.aocx。
