Self Balacing Robot Battery Version Compare

From Terasic Wiki

Revision as of 15:32, 24 May 2018 (view source) Bingxia (Talk | contribs) ← Older edit		Revision as of 15:34, 24 May 2018 (view source) Bingxia (Talk | contribs) Newer edit →
Line 21:		Line 21:
	[[File:Robot 4.jpg|500px]]		[[File:Robot 4.jpg|500px]]
-
-
-	[[Battery_Version_Compare|Back]]

---

Revision as of 15:34, 24 May 2018

Contents 1 Appearance 2 Battery 3 Fix the battery 4 Connect battery to the robot

Appearance

The battery_case is high, so the pillar of battery_case version robot is 5mm higher than the pillar of battery_package version robot, as shown in Figure below.

Battery

The battery_package version robot kit contains one 12V lithium battery package, the battery_case version robot kit contains one lithium battery case, uses need to buy three 18650-lithium batteries, as shown in Figure below.

Fix the battery

The battery_package version robot used a black package to fix the lithium battery, the battery_case version robot used a belt to fix the battery case, as shown in Figure below.

Connect battery to the robot

The battery_package has DC male connector, users can connect it directly to the robot and provide power. The battery_case has only one DC Female connector, uses need one extra DC cable to connect the robot and battery_case, as shown in Figure below.