From Terasic Wiki

Revision as of 14:02, 24 April 2020 (view source) Admin (Talk | contribs) (→Fix) ← Older edit		Revision as of 14:07, 24 April 2020 (view source) Admin (Talk | contribs) (→Fix) Newer edit →
Line 14:		Line 14:
	=Fix=		=Fix=
-		+	#Open PowerShell as Administrator and run:
-		+	#:
-		+	#:Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
-		+	#:
-		+	#3
	[[Apollo_S10_SoM_FAQ|Back]]		[[Apollo_S10_SoM_FAQ|Back]]

---

Revision as of 14:07, 24 April 2020

Issue

Q: My Quartus is installed with 19.4 Pro Edition, when I run the Nios design demobatch file in theTerasic System CD , the following error will appear:

How to fix it ?

A: Starting with the Nios® II EDS in the Intel® Quartus® Prime Pro Edition software version 19.2 and Intel® Quartus® Prime Standard Edition software version 19.1, the Cygwin component in the Windows* version of Nios II EDS has been removed and replaced with Windows Subsystem for Linux(WSL).

So to run the NIOS II Command Shell properly, you need to follow the steps below to install.

Fix

1. Open PowerShell as Administrator and run:

   Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux

2. 3

Back