TR10a-HL ENFAQ
From Terasic Wiki
(Difference between revisions)
(Created page with "# #:'''Q:'''There are 6 pins on the TR10a-HL external power connector, which pin are 12V power and which are ground? Is there a required sequence of external power supply and PCI...") |
|||
| Line 2: | Line 2: | ||
#:'''Q:'''There are 6 pins on the TR10a-HL external power connector, which pin are 12V power and which are ground? Is there a required sequence of external power supply and PCIe power supply? | #:'''Q:'''There are 6 pins on the TR10a-HL external power connector, which pin are 12V power and which are ground? Is there a required sequence of external power supply and PCIe power supply? | ||
#:<span style="color:#0000ff;">'''A''':Please refer to the figure below to see which 3 pins are 12V and GND pin. You can choose either the external power supply or the PCIe power supply. No sequence for power supply is required. If power is supplied at the same time, the board itself will automatically switch to external power supply </span> | #:<span style="color:#0000ff;">'''A''':Please refer to the figure below to see which 3 pins are 12V and GND pin. You can choose either the external power supply or the PCIe power supply. No sequence for power supply is required. If power is supplied at the same time, the board itself will automatically switch to external power supply </span> | ||
| + | #:[[File:Tr10a hl faq power.jpg]] | ||
Revision as of 09:50, 27 May 2020
-
- Q:There are 6 pins on the TR10a-HL external power connector, which pin are 12V power and which are ground? Is there a required sequence of external power supply and PCIe power supply?
- A:Please refer to the figure below to see which 3 pins are 12V and GND pin. You can choose either the external power supply or the PCIe power supply. No sequence for power supply is required. If power is supplied at the same time, the board itself will automatically switch to external power supply
