From Terasic Wiki

Revision as of 14:05, 26 February 2021 (view source) Admin (Talk | contribs) (→Rev. A to Rev. B) ← Older edit		Revision as of 14:10, 26 February 2021 (view source) Admin (Talk | contribs) (→Rev. A to Rev. B) Newer edit →
Line 17:		Line 17:
	#:		#:
	#:[[File:De ag sw9.jpg|400px]]		#:[[File:De ag sw9.jpg|400px]]
		+	#Modify the direction of the external power connector.
		+	#:
		+	#:[[File:De ag ex pwr.jpg|700px]]

---

Revision as of 14:10, 26 February 2021

How to Find the DE10-Aiglex Board Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.

As shown in the figure below, if the letter inside the red circle is "B", it means that the PCB version is Rev.B.

Board Revision Details

Rev. A to Rev. B

1. Add Force External Power Switch (SW1) to Enable/Disable External Power Requirement when connected to the HOST PC.

   

2. Add System MAX10 Jtag bypass switch (SW9) for increase JTAG sacn speed.

   

3. Modify the direction of the external power connector.