TR10a HL Configure sof file into FPGA Flash

From Terasic Wiki

3.1 Execute Shell Script

In this section we will introduce how to change .sof file to .pof file via executing Shell Script under Centos and configure it into the flash of TR10a_HL.

1.Download the toolkits for configuring flash from http://mail.terasic.com.tw/~johnny/release/tr10a_hl/tr10a_hl_flash_programming.zip, its contents are as below:

Item	File name	Description
1	tr10a_hl.cdf	Chain Description File, use for JTAG configure setting
2	TR10A_HL_pfl.sof	.sof file with PFL IP, use for download .pof file to flash
3	factory.sof	.sof file that will be configured into flash page0(Factory location)
4	user.sof	.sof file that will be configured into flash page1(user image location)
5	test.sh	the Shell Script
6	tr10a_hl.cof	the setting file that change user_image.sof to .pof file

2.Named the .sof file as factory.sof(It is the factory location in flash), it will be configured into flash, copy it and cover into flash programming window.

3.If users need to configure another .sof file into flash user image, rename the second .sof file as user.sof and copy into flash programming window.

4.Go to flash programming windows under Terminal, run command "sh test.sh", the system start to change user_image.sof to outputfile.pof and configure into flash.

5.Below is the configuring process, it will take about 10 minutes.

6.Below picture showed the image switching status in flash.