TR10a-HL ENFAQ

From Terasic Wiki

Revision as of 09:50, 27 May 2020 by Admin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Q:There are 6 pins on the TR10a-HL external power connector, which pin are 12V power and which are ground? Is there a required sequence of external power supply and PCIe power supply?
    A:Please refer to the figure below to see which 3 pins are 12V and GND pin. You can choose either the external power supply or the PCIe power supply. No sequence for power supply is required. If power is supplied at the same time, the board itself will automatically switch to external power supply
Retrieved from "http://www.terasic.com.tw/wiki/TR10a-HL_ENFAQ"
Personal tools