DE25-Standard Board Revision Document

From Terasic Wiki

Revision as of 14:12, 16 September 2024 by Admin (Talk | contribs)
Jump to: navigation, search

How to Find the DE25-Standard Development Kit Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.


As shown in the figure below, if the letter inside the red circle is "A0", it means that the PCB version is Rev.A. "B0" for Rev.B.

De25 standard 01.jpg

Board Revision Details

Version Difference Report: From Version A to Version B

  1. Solve the issue where the HPS UART port requires the PC to reconnect after a power cycle of the board.
  2. Replace the Micro SD card socket from the hinge type to the push-push type.
Retrieved from "http://www.terasic.com.tw/wiki/DE25-Standard_Board_Revision_Document"
Personal tools