MA27 Board Revision Document
From Terasic Wiki
Contents |
How to Find the Mercury A2700 Accelerator Card Revision?
On the bottom view of the PCB, there is a seal mark for the board hardware version.
As shown in the figure below, if the letter inside the red circle is "A", it means that the PCB version is Rev.A.
Board Revision Details
Version A to Version B
- Change FPGA part number form the AGIB027R29A1E2VR3(Rev. A) to AGIB027R29A1E2VB(Rev. B)
- Chagne the silk screen of the SW6, modify "0' and "1".
-
- Move MCIO xcvr pin from the bank 15A to 15C of the FPGA.
Version B to Version B1
- Change FPGA part number form the AGIB027R29A1E2VB(Rev. B) to AGIB027R29A1E2VC(Rev. B1)
