Can't download .sof file

From Terasic Wiki

Revision as of 11:29, 18 April 2017 by Dongliu (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1. Can't download .sof file as Hardward port couldn't been found in Programmer window

Solution:No USB Blaster port is detected in Programmer window。


2. Programmer window can detect USB Blaster port, but download progress bar presents "Failed"

a. Check switch RUN/PROG setting is correct or not(Please set it to RUN mode).

b.Please make sure the board jtag circuit is in loopback state. For example, if you connect a daughter card on HSMC connector, you need check the board corresponding jumper setting.

c.Check the Programmer window Mode setting is correct or not(set Mode to Jtag).


back

Retrieved from "http://www.terasic.com.tw/wiki/Can%27t_download_.sof_file"
Personal tools