DE10-Advanced User Manual

From Terasic Wiki

(Difference between revisions)
Jump to: navigation, search
(→2.1 Layout and Components)
 
(201 intermediate revisions not shown)
Line 1: Line 1:
-
=Chapter 1 DE10-Advanced Development Kit=
+
*[[DE10-Advance_document_revB|DE10-Advanced Document Rev C]]
-
Terasic A10SOC is a kind of the best SoC FPGA development platform with various advanced interfaces. It built around the Intel Arria 10 SoC FPGA, which combines the dual-core ARM Cortex A9 CPU and provides 660K LEs. A10SOC has many peripherals, it can transfer data to PC with a high speed through PCIEx4 GEN3 and Type-C USB connector. The four SFP interfaces and Gigabit Ethernet port can be used in network application. HDMI 2.0 output and the two DDR4 SODIMMs allow users to deal with high bandwidth of image. A10SOC provides a FMC connector, it can extend more development space. Generally speaking, A10SoC has powerful computing and interface processing capacity, it must be the best choice for Network Communication, High Performance Computing, Image Processing and other applications.
+
-
 
+
-
==1.1 Package Contents==
+
-
The DE10-Advanced package includes:
+
-
*The DE10-Advanced board
+
-
*Quick Start Guide
+
-
*TBD
+
-
 
+
-
==1.2 DE10-Advanced System CD==
+
-
The DE10-Advanced System CD contains all the documents and supporting materials associated with DE10-Advanced, including the user manual, system builder, reference designs, and device datasheets. Users can download this system CD from the link: http://DE10-Advanced.terasic.com/cd.
+
-
 
+
-
==1.3 Getting Help==
+
-
Here are the addresses where you can get help if you encounter any problems:
+
-
 
+
-
Terasic Technologies
+
-
 
+
-
9F., No.176, Sec.2, Gongdao 5th Rd, East Dist, Hsinchu City, 30070. Taiwan
+
-
 
+
-
Email: support@terasic.com
+
-
 
+
-
Tel.: +886-3-575-0880
+
-
 
+
-
Website: DE10-Advanced.terasic.com
+
-
 
+
-
=Chapter 2 Introduction of the DE10-Advanced Board=
+
-
This chapter provides an introduction to the features and design characteristics of the board.
+
-
==2.1 Layout and Components==
+
-
Figure 2-1 shows a photograph of the board. It depicts the layout of the board and indicates the location of the connectors and key components.
+
-
 
+
-
[[File:DE10-Advanced.jpg]]
+
-
 
+
-
:::::::Figure 2-1 DE10-Advanced development board (top view)
+
-
 
+
-
The DE10-Advanced board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.
+
-
The following hardware is provided on the board:
+
-
*FPGA
+
-
**USB Type-C Interface - Power Delivery, DisplayPort TX/RX with 4 lanes & USB 3.0/2.0
+
-
**HDMI 2.0 for 4K2K@60- FPGA Transceiver
+
-
**PCIe Cabling Socket at Gen3 x4
+
-
**SFP+ Socket x4,40Gbps
+
-
**SATA 3.0 Host and SATA Device x2 (SATA Connector x4)
+
-
**FMC Connector x1 with xcvr(High Pin Count).Support VADJ 1.2V/1.5V/1.8V only
+
-
**One Gigabit Ethernet Port
+
-
**DDR4 SO-DIMM Socket x2 with ECC (up to 1066.667MHz)
+
-
**Accelerometer and Gyroscope (MPU9250)
+
-
**EPCQ512 Serial Flash for Configuration and User Data
+
-
**Fixed and Programmable clock source for user logic,user interface,xcvr and memory
+
-
**Temperature Sensor,I2C Fan Control
+
-
**SMA Clock-In and Clock-Out.Support 1.8V I/O Standard
+
-
**LED x2,Button x2,Switch x2,7-Seg x2
+
-
**On Board USB Blaster II
+
-
 
+
-
*HPS(Hard Processor System)
+
-
**1024 Mb QSPI Flash,nand flash,MicroSD Socket for boot and data (Boost Flash Slot,same as Altera Arria10 SoC board)
+
-
**DDR4 x72 with ECC,4GB at 1067 MHz (up to 4GB)
+
-
**Giga Ethernet with RJ45 Connector
+
-
**USB OTG,mini-AB USB connector
+
-
**UART-to-USB,Mini-B USB Connector
+
-
**RTC
+
-
**LED x1,Button x1
+
-
**Cold Reset and Warm Reset
+
-
 
+
-
==2.2 Block Diagram of the DE10-Advanced Board==
+
-
Figure 2-2 is the block diagram of the board. All the connections are established through the Arria 10 SoC FPGA device to provide maximum flexibility for users.
+
-
Users can configure the FPGA to implement any system design.
+
-
 
+
-
[[File:DE10-Advanced Block Diagram.jpg|750px]]
+
-
 
+
-
::::::::::::Figure 2-2 Block diagram of DE10-Advanced
+
-
 
+
-
 
+
-
Detailed information about Figure 2-2 are listed below.
+
-
 
+
-
FPGA Device
+
-
*Arria 10 SoC 10AS066K3F40E2SG Device
+
-
*Dual-core ARM Cortex-A9 (HPS)
+
-
*660K programmable logic elements
+
-
*42,660 Kbits embedded memory
+
-
*Hard memory controllers x5
+
-
*Transceivers x48(17.4 Gbps)
+
-
*Accelerometer&Gyroscope Device MPU9250
+
-
 
+
-
Configuration and Debug
+
-
*EPCQ512 Serial Configuration Device
+
-
*Onboard USB-Blaster II (Mini-B USB connector)
+
-
 
+
-
Memory Device
+
-
*32GB DDR4 SDRAM on FPGA
+
-
*DDR4 SO-DIMM Socket on HPS
+
-
*DDR4 SO-DIMM Socket on FPGA
+
-
*Micro SD card socket on HPS
+
-
*1024Mb QSPI Flash on HPS
+
-
 
+
-
Communication
+
-
*USB OTG, mini-AB USB connector
+
-
*UART-to-USB, Mini-B USB Connector
+
-
*Giga Ethernet x2
+
-
*PCIe Cabling Socket
+
-
 
+
-
Connectors
+
-
*one FMC Connectors(Vita 57.1)
+
-
*SATA Connectors x4
+
-
*SDI x2
+
-
*SFP interfaces x4
+
-
*HDMI Connector x1
+
-
*SMA Connectors x2(SMA clock in/out)
+
-
 
+
-
Switches, Buttons and Indicators
+
-
*Buttons x3 (FPGA x2, HPS x1)
+
-
*Switches x2 on FPGA
+
-
*LEDs x3 (FPGA x2, HPS x1)
+
-
*7-segment displays x2
+
-
 
+
-
Sensors
+
-
*Temperature Sensor on FPGA
+
-
 
+
-
Power
+
-
*12V DC input
+
-
*12V Power Monitor
+
-
*Power Controller
+

Latest revision as of 17:29, 29 August 2018

Retrieved from "http://www.terasic.com.tw/wiki/DE10-Advanced_User_Manual"
Personal tools