DE10-Pro Board Revision Document
From Terasic Wiki
Product Roadmap
The figure below shows the DE10-Pro product name corresponds to PCB version.
The detailed FPGA sepcifiaction of each product name are list in the table below:
| Item | PCB Version | Product Number | Product Name | Family Part Number | Family Variant | Logic Density |
| 1 | B | P0576 | DE10-Pro-GL2E1 | 1SG280LU2F50E1VG | GX | 2800K |
| 2 | C | P0536/P0612 | DE10-Pro-GH2E2-280 | 1SG280HU2F50E2VG | GX | 2800K |
| 3 | C | P0592/P0613 | DE10-Pro-GH2E2-165 | 1SG165HU2F50E2VG | GX | 1650K |
| 4 | C | P0620 | DE10-Pro-SL2E1-280 | 1SX280LU2F50E1VG | SX | 2800K |
| 5 | D | P0626/P0628 | DE10-Pro-GX-280 | 1SG280HU1F50E1VG | GX | 2800K |
| 6 | D | P0627/P0629 | DE10-Pro-SX-280 | 1SX280HU2F50E1VG | SX | 2800K |
What's Differences between the DE10-Pro SX and DE10-Pro GX
The difference between DE10-Pro GX and DE10-Pro SX is the FPGA device part number of the Stratix 10 FPGA on the board. The DE10-Pro SX's FPGA usning SoC FPGA built-in Quad-core ARM * Cortex * -A53 MPCore * processor and other peripheral controllers.
The DE10-Pro SX and DE10-Pro GX products use the same PCB, but the DE10_Pro SX will have the following three interfaces in particular:
- Micro SD Card Socket for HPS booting
- HPS I/O Connector for connecting expansion HPS interface Card
- EPCQL flash for booting
These components are not included in the DE10-Pro GX version.
Board Revision Details
| Revision | Description |
|---|---|
| C | Released |
| D | 1. Modify HPS LED circuit to fix HPS LED brightness issue:
GX: 1SG280HU1F50E1VG SX: 1SX280HU2F50E1VG The SX FPGA DE10-Pro board has a MicroSD card socket, EPCQ device and HPS daughter card connector while the GX FPGA DE10-Pro board hasn’t. 2. Due to FPGA device is -1 core speed, DDR4 SODIMM module is replaced with DDR4-2666 DDR4 module. 3. Modify HPS LED circuit to fix HPS LED brightness issue. |
