DE10 Nano FAQ EN

From Terasic Wiki

Revision as of 09:34, 26 May 2020 by Admin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. Q:Why does the error message show up when users use the DE10-Nano and try to program the flash with “quartus_hps” command??
    A:This is because quartus_hps command is mainly used for programming NAND flash and QSPI flash, but DE10-Nano doesn’t have these two components mounted; that’s why DE10-Nano is unable to realize flash programming and QSPI boot, either.
Retrieved from "http://www.terasic.com.tw/wiki/DE10_Nano_FAQ_EN"