Intel USB Blaster Driver Installation Instructions
From Terasic Wiki
(Difference between revisions)
Line 1: | Line 1: | ||
#Make sure the USB blaster connector of the development board and your Host PC is connected with USB cable(Also the board is power up). | #Make sure the USB blaster connector of the development board and your Host PC is connected with USB cable(Also the board is power up). | ||
- | #Open the '''Device Manager''', and right-click on the ''' | + | #Open the '''Device Manager''', and right-click on the '''USB-Blaster''' under the '''Other devices''' branch. |
#Select '''Update Driver Software'''. | #Select '''Update Driver Software'''. | ||
- | #:[[File: | + | #:[[File:Ubt driver 01.jpg|300px]] |
#Select '''Browse my computer for driver software'''. | #Select '''Browse my computer for driver software'''. | ||
#:[[File:Ub2 driver install 02.png|500px]] | #:[[File:Ub2 driver install 02.png|500px]] |
Revision as of 10:46, 19 August 2022
- Make sure the USB blaster connector of the development board and your Host PC is connected with USB cable(Also the board is power up).
- Open the Device Manager, and right-click on the USB-Blaster under the Other devices branch.
- Select Update Driver Software.
- Select Browse my computer for driver software.
- Enter the location of the Quartus software USB-Blaster II driver files directory (<Path to Quartus Prime installation>\drivers\usb-blaster-ii) in the Search for driver software in this location field.
- Click Next.
- Click Install in the Would you like to install this device software? Windows security dialog box.
- Close the Update Driver Software - Altera USB-Blaster II (Unconfigured)successful installation notification.
- The Device Manager now shows a new branch called JTAG cables with an Altera USB-Blaster II (JTAG interface) node.
- Open the Quartus Prime Programmer. Within a few seconds, the JTAG cables branch displays two nodes: Altera USB-Blaster II (JTAG interface) and Altera-USB Blaster II (System Console interface).