Intel USB Blaster II Driver Installation Instructions
From Terasic Wiki
(Difference between revisions)
Line 1: | Line 1: | ||
+ | #Before installing the USB blaster driver, please make sure that the''' Quartus Prime''' software has been installed on the host. | ||
#Plug the USB-Blaster II cable into your PC. | #Plug the USB-Blaster II cable into your PC. | ||
#Open the '''Device Manager''', and right-click on the '''Unknown device''' under the '''Other devices''' branch. | #Open the '''Device Manager''', and right-click on the '''Unknown device''' under the '''Other devices''' branch. |
Latest revision as of 15:43, 9 May 2023
- Before installing the USB blaster driver, please make sure that the Quartus Prime software has been installed on the host.
- Plug the USB-Blaster II cable into your PC.
- Open the Device Manager, and right-click on the Unknown device under the Other devices branch.
- Select Update Driver Software.
- Select Browse my computer for driver software.
- Enter the location of the Quartus software USB-Blaster II driver files directory (<Path to Quartus Prime installation>\drivers\usb-blaster-ii) in the Search for driver software in this location field.
- Click Next.
- Click Install in the Would you like to install this device software? Windows security dialog box.
- Close the Update Driver Software - Altera USB-Blaster II (Unconfigured)successful installation notification.
- The Device Manager now shows a new branch called JTAG cables with an Altera USB-Blaster II (JTAG interface) node.
- Open the Quartus Prime Programmer. Within a few seconds, the JTAG cables branch displays two nodes: Altera USB-Blaster II (JTAG interface) and Altera-USB Blaster II (System Console interface).