TSoM Programming the EPCS Device

From Terasic Wiki

Revision as of 10:46, 15 May 2019 by Admin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This guide describes how to program the serial configuration (EPCS) device with Serial Flash Loader (SFL) function via the JTAG interface. Users can program EPCS devices with a JTAG indirect configuration (.jic) file, which is converted from a user-specified SRAM object file (.sof) in Quartus. The .sof file is generated after the project compilation is successful. The steps of converting .sof to .jic in Quartus II are listed below.


1.1 Before Programming Begins

Retrieved from "http://www.terasic.com.tw/wiki/TSoM_Programming_the_EPCS_Device"