Terasic USB Blaster revB Manual
From Terasic Wiki
Introduction
The Terasic USB Blaster Download Cable(UBT) interfaces a USB port on a host computer to an FPGA mounted on a printed circuit board. The cable sends configuration data from the host computer to a standard 10-pin header connected to the FPGA. You can use the UBT to iteratively download configuration data to a system during prototyping or to program data into the system during production.
Supported Devices and Host System
The Intel FPGA , Serial configuration device and host systems that UBT supported are list in Table 1-1, Table 1-2 and Table 1-3
FPGA Serie | Deivce |
---|---|
Stratix Series | Stratix 10, Stratix V, Stratix IV, Stratix III, Stratix II GX and Stratix GX |
Arria Series | Arria 10, Arria V, Arria II, Arria GX |
Cyclone Series | Cyclone 10,Cyclone V, Cyclone IV, Cyclone III, Cyclone II, Cyclone |
MAX series | MAX10,MAX V, MAXII , MAX3000, MAX7000 and MAX9000 |
Other | FLEX10K, ACEX1K, APEX 20K |