DE25-Nano

• FPGA: A5EB013BB23BE4SCS (138K Logic Elements)
• Dimensions: 106.9 mm x 68.58mm
• Onboard Programmer: USB-Blaster III via USB Type-C connector
• Configuration Mode: Supports ASx4 mode with 128 Mbit QSPI Flash
• Cooling Solution: Active heatsink

FPGA side

• LPDDR4:1GB LPDDR4 with 32-bit data bus. Data Rate: 2666 MT/s (Rev. B) / 2133 MT/s (Rev. A)
• SDRAM:128MB SDRAM with 16-bit data bus
• HDMI Output: Supports up to 1080p resolution
• Camera Interface: One MIPI connector with 2 data lanes
• ADC: 8-channel ADC with 2×5 header
• GPIO Headers: Two 3.3V 2×20 DE-GPIO headers
• User Interface: 8 user LEDs, 2 buttons, 4 slide switches
• UART Port: 2-pin UART via Type-C connector
• Thermal Management: Integrated temperature sensor and fan controller

HPS side

• MicroSD Socket
• LPDDR4 Memory: 1 GB LPDDR4 with 32-bit data bus (shared with FPGA). Data Rate: 2133 MT/s.
• Ethernet: Gigabit Ethernet PHY with RJ45 port
• USB Port: One USB 2.0 port via Type-C connector
• UART Interface: UART to USB via Type-C connector
• Sensor: Integrated accelerometer
• User Interface: 1 LED, 1 button, and 1 cold reset button

Software Support

• FPGA Example Code
• Linux BSP

Block Diagram

Connection to 2x20 GPIO Daugher Card

• Connect to LT24
  
   
• Connect to MTL2
  
   
• Connect to D8M
  
   
• Connect to SMK
  
   
• Connect toRFS2