|
|
如何選擇適合的 FPGA 開發板?
|
 |
Agilex

|
Intel® Agilex™ F-Series FPGA Development Kit
- Intel®
Agilex™ F-Series SoC FPGA (1400 K LE) with Quad-core 64 bit Arm Cortex*-A53 processor(up to 1.41GHz with 32 KB I/D cache)
- 4x 288-Pin DDR4 DIMMs sockets to support 72 bits DDR4/DDR-T module for FPGA Fabric (3 DDR4 DIMMs) and HPS memory interface(1 DDR4 DIMM)
- PCIe x16 Gen 4 golden finger connected to P-Tile transceivers, also support x1/x4/x8 mode
- 2x Standard QSFPDD supports both optical and electrical cable interfaces connected to E-Tile transceivers
|
|

|
Intel® Agilex™ F-Series Transceiver-SoC Development Kit
- Intel®
Agilex™ F-Series SoC FPGA (1400 K LE) with Quad-core 64 bit Arm Cortex*-A53 processor(up to 1.41GHz with 32 KB I/D cache)
- 8 GB Double Data Rate 4 (DDR4) component interface for either FPGA fabric or HPS
- 16 P-tile channels fan out to PCIe Root complex interface which can run up to Gen4 depending on FPGA core fabric speed grade
- 16 E-tile transceiver channels fan out to Multi-Speed Port (MXP), Quad Small Form Factor Double Density (QSFPDD) and Quad Small Form-Factor Pluggable 28 (QSFP28) interfaces
|
|

|
DE10-Agilex
- Intel® Agilex™ F-Series FPGA AGFB014R24A2E2VR0
- Two QSFPDD connectors for 200/100/40/25/10 GbE network interface
- Four independent DDR4 SODIMM sockets
|
|
 |
|
|
Stratix 10

|
Apollo S10 SoM
- Intel Stratix 10 SoC Standalone Module with onboard USB-Blaster II
- FMC+ and FMC connectors for expansion
- Support two independent 32GB DDR4 with ECC.
- Ideal for Prototyping, Industrial Control System, Military and Aerospace
|
|

|
Stratix 10 MX FPGA Development Kit
- Intel® Stratix® 10 MX FPGA H-Tile(8 GB/16 GB)
- On-board 8GB DDR4 , one DDR4 DIMM and one HiLo connector supporting DDR4 and QDR-IV
- Two QSFP28 optical interface port
- PCIe Root and End Point connector
|
|

|
Intel® Stratix® 10 TX Signal Integrity Development Kit
- Intel® Stratix® 10 TX 280 F2912 FPGA
- One FMC+ connector
- Two QSFPDD 1x1, one QSFPDD 2x1 and two QSFPDD 1x2 optical transceiver interface
|
|

|
Stratix 10 SX SoC Development Kit
- 1SX280LU2F50 Intel® Stratix® 10 SoC FPGA
- One DDR4 SO-DIMM for FPGA and one HILO Memory Connector for HPS
- Two FMC+ connector for expansion
- Two 28 Gbps ZQSFP+ Ports and One 10 Gbps SFP+ Port
|
|

|
Intel® Stratix® 10 DX FPGA Development Kit
- Intel®
Stratix®
10 DX FPGA
- On-board DDR4 SDRAM (8GB) and 2 DDR4 DIMM (8GB each)
- Two quad small-form-factor pluggable (QSFP56) cages
- PCIe Gen4x16 Endpoint via Edge Connector
|
|

|
DE10-Pro
- Intel Stratix 10 GX/SX FPGA
- Four QSFP28(100GbE) connectors and one PCI Express (PCIe) x16 edge connector
- Four independent DDR4 SODIMM sockets (work with DDR4/QDR-II+/QDR-IV)
|
|

|
Stratix 10 GX Signal Integrity Development Kit
- Evaluate transceiver channel performance
- Generate and verify pseudo-random binary sequence (PRBS) patterns via an easy-to-use GUI
- Dynamically change the channel's differential output voltage (VoD), pre-emphasis, and equalization settings to optimize the performance for your channel
|
|

|
Stratix 10 GX FPGA Development Kit
- Develop and test PCI Express® (PCIe®) 3.0 designs using the PCI-SIG®-compliant development board.
- Develop and test memory subsystems consisting of DDR4, DDR3, QDR IV, and RLDRAM III memories.
- Develop modular and scalable designs by using the FPGA mezzanine card (FMC) connectors to interface to a FMC mezzanine card provided by Altera partners and supporting protocols, such as JESD204B, Serial RapidIO®, 10 Gbps Ethernet (10GbE), SONET, Common Public Radio Interface (CPRI),OBSAI, and many others.
|
|
 |
|
|
Stratix V

|
Terasic TR5 FPGA Development Kit
- Stratix V GX 5SGXEA7N2F45C2N
- DDR3 SO-DIMM and FMC x4 Connectors
- Large ASIC Prototyping Applications
|
|

|
TR5-F40W
- Intel Stratix® V GX FPGA (5SGXEA3K2F40C3)
- On-Board USB Blaster II or JTAG header for FPGA programming
- Fast passive parallel (FPPx32) configuration via MAX II CPLD and flash memory
- SSRAM, FLASH
|
|

|
TR5-Lite
- Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
- Two SFP+ connectors, One Serial ATA (SATA II) host port
- DDR3 SDRAM, ISSI, FLASH
|
|

|
DE5-Net FPGA Development Kit
- Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
- 32MB SRAM (ISSI QUADP for DE5-Net 450, GSI SigmaQuad-II+ for DE5-Net 550, Cypress QDRII+ for DE5-Net 500)
- Up to 8GB DDR3 800 MHz SO-DIMM SDRAM
|
|

|
Altera Stratix V GX FPGA Development Kit
- Stratix V GX FPGA 5SGXEA7K2F40C2N
- DDR3 SDRAM, QDR II+ SRAM, RLDRAM II
- PCIe x8, HSMC, SDI, QSFP, Gigabit Ethernet
|
|

|
Altera DSP Development Kit, Stratix V Edition
- Stratix V GS FPGA: 5SGSMD5K2F40C2N
- DDR3 SDRAM, QDR II+ SRAM, RLDRAM II
- PCIe x8, QSFP, Gigabit Ethernet, SDI, HSMC
|
|

|
Altera Transceiver Signal Integrity Development Kit, Stratix V GX Edition
- Stratix V GX FPGA 5SGXEA7N2F40C2N
- Configuration flash
- 28 full-duplex transceiver channels
|
|

|
Altera Transceiver Signal Integrity Development Kit, Stratix V GT Edition
- Stratix V GT 5SGTMC7K3F40C2N
- Configuration flash
- 32 full-duplex GXB transceiver channels (up to 28.05 Gbps), Gigabit Ethernet
|
|

|
Altera 100G Development Kit, Stratix V GX Edition
- Featured device: 5SGXEA7N2F45C2N
- DDR3 SDRAM, QDR II
- QSFP, SFP+, SMA, CFP, Interlaken interface, Gigabit Ethernet
|
|
 |
|
|
Stratix IV

|
Terasic TR4 FPGA Development Kit
- Stratix IV GX EP4SGX230/EP4SGX530 with High Speed Transceivers
- 2 PCIe x4 Connectors and DDR3 SO-DIMM Slot
- Stackable Design for Multi-FPGA System
|
|
 |
|
|
Arria 10

|
FLIK
- Intel® Arria® 10 GX FPGA with 1150K logic elements
- Total 8 GB DDR4-2133 memory
- 1024Mb QSPI Flash
- One Thunderbolt™ 3 port for host communication and on-board USB-Blaster II function
- Power/temperature monitor and auto fan speed control
|
|

|
TR10a-LP QDRII+ Arria 10 FPGA Development Kit
- Intel Arria 10 GX FPGA (10AX115N3F45E1)
- Low Profile PCIe Gen3 x16 (Dual PCIe Gen3 x8) Board
- Two QSFP+ Connectors
- Five Independent 550MHz QDRII+ SRAMs
|
|

|
Heterogeneous Extensible Robot Open Platform
- Build-in OpenVINO Toolkit
- Intel Arria 10 GX FPGA (10AX115S2F45I1SG)
- Intel Core™ i5/i7 Processor
|
|

|
HAN Pilot Platform
- Arria 10 SoC with Dual-core ARM Cortex-A9
- DDR4, HDMI, FMC, PCIe, SATA, Ethernet, Flash, USB, etc.
- Type-C USB 3.1 Gen1 and DisplayPort Altenate Mode
- Support Linux BSP
|
|

|
Arria® 10 GX Transceiver Signal Integrity Development Kit
- Intel Arria 10 GX 10AX115S2F45I1SG FPGA
- Six full-duplex transceiver channels with 2.4 mm SMA connectors
- Transceiver channels to Amphenol Xcede+ backplane connector, QSFP+,CFP2 and SFP+ optical interface
|
|

|
Arria 10 GX FPGA Development Kit
- Arria 10 GX FPGA (10AX115S2F45I1SG)
- 1 GB DDR4 SDRAM, 2GB DDR3 SDRAM, and RLDRAM3 (16 Meg x 36) daughtercards
- One QSFP and one SFP+ connectors, one PCI Express (PCIe) x8 edge connector
- Two FMC low-pin count (LPC + 15 transceivers) connector
|
|

|
TR10a-HL2 Arria 10 FPGA Development Kit
- Arria 10 GX FPGA (10AX115N3F45E1)
- Half-length PCIe Gen3 x8 board
- Four QSFP+ connectors
- Six independent 550MHz QDRII+ SRAMs
|
|

|
TR10a-HL Arria 10 FPGA Development Kit
- Arria 10 GX FPGA (10AX115N3F45E1)
- Half-length PCIe Gen3 x8 board
- Four QSFP+ connectors
- Six independent 550MHz QDRII+ SRAMs
|
|

|
DE5a-Net-DDR4
- Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
- Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
- Two independent DDR4 SODIMM socket and four independent 550MHz QDRII+ SRAMs
|
|

|
Arria 10 SoC Development Kit
- Evaluate Arria 10 SoC device features and performance
- Begin development of your hardware and software design
- Use as a platform for target reference designs, OS/BSP, and tools
|
|

|
DE5a-Net Arria 10 FPGA Development Kit
- Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
- 4個 QSFP+ 連介面和1個 PCI Express (PCIe) x8 連接器
- 2 個獨立 DDR3 SODIMM 插槽和4個獨立 550MHz QDRII+ SRAMs 模塊
|
|
 |
|
|
Cyclone 10
|
|
Cyclone V

|
FPGA Cloud Connectivity Kit
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- Wi-Fi, using ESP-WROOM-02 module
- Bluetooth SPP, using HC-05 module, up to 10 meter range
- Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers
|
|

|
Developer Kit for OpenVINO™ Toolkit
- Bundled with Terasic Starter Platform for OpenVINO™ Toolkit and Intel IoT Dev. Kit (UP2)
- Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
- Ideal coding environment for OpenVINO developer as standalone system
|
|

|
Terasic SoC System on Module Evaluation KIT
- SoC System on Module
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
|
|

|
Starter Platform for OpenVINO™ Toolkit
- Cyclone V GT PCIe Board, 301K LE, PCIe
- 1GB DDR3, 64MB SDRAM, EPCQ256
- UART-to-USB, GPIO and Arduino Headers
|
|

|
ADC-SoC
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- On-board two high speed A/D conveters
- 1GB DDR3 SDRAM (32-bit data bus)(HPS)
- Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit
Ethernet and GPIO Headers
|
|

|
VEEK-MT2S
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
- 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror
|
|

|
DE10-Standard
- Intel Cyclone V SoC FPGA,ARM Cortex-A9 雙核 HPS
- FPGA:SDRAM、VGA 輸出、Video 輸入、ADC 接頭、GPIO 接頭、HSMC 接頭
- HPS:DDR3、USB Host 埠、MicroSD 卡槽、乙太網、UART 轉 USB、LTC 接頭
- 支持 Linux BSP 和 openCL BSP
|
|

|
VEEK-MT2-C5SoC
- Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
- 8-Megapixel Digital Image Sensor Module with auto focus
- 7" LCD Touch Screen Module with 5 point touch
- Accelerometer, Gyroscope, Magnetometer, Ambient Sensor
|
|

|
DE10-Nano Kit
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 SDRAM (32-bit data bus) (HPS)
- Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers
|
|

|
DE0-Nano-SoC Kit/Atlas-SoC Kit
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 SDRAM (32-bit data bus)(HPS)
- Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers
|
|

|
DE0-CV Board
- Cyclone V 5CEBA4F23C7N Device
- 4-bit Resistor VGA
- Provides SPI and 4-bit SD mode for SD Card access
- Serial Configuration device – EPCS64
- 64MB SDRAM, x16 bits data bus
- On-Board USB Blaster (Normal type B USB)
|
|

|
DE1-SoC-MTL2
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
- Touch & LCD Spec
|
|

|
DE1-SoC Board
- Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
- 1GB DDR3 and 64MB SDRAM
- VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
|
|

|
SoCKit - the Development Kit for New SoC Device
- Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
- 2GB DDR3, 128MB QSPI Flash, EPCQ256
- SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC
|
|

|
Cyclone V GX Starter Kit
- Cyclone V GX 5CGXFC5C6F27C7N Device
- LPDDR2, SRAM, FLASH EPCQ256
- Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX
|
|

|
Cyclone V SoC Development Kit and SoC Embedded Design Suite
- Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
- Hard processor system (HPS)
- DDR3, QSPI Flash, Micro-SD Card
|
|

|
Cyclone V GT FPGA Development Kit
- FPGA prototyping
- FPGA power measurement
- Transceiver I/O performance up to 5.0 Gbps
- PCI Express®
(PCIe®
) Gen2 x4 (at 5.0 Gbps per lane)
- Endpoint or rootport support
|
|

|
Altera Cyclone V E FPGA Development Kit
- Cyclone V E FPGA - 5CEFA7F31I7N
- DDR3 x32 at 300 MHz (soft memory controller)
- On-board USB-BlasterTM II cable (USB, PHY, Max® V CPLD)
|
|
 |
|
|
Cyclone IV

|
嵌入式影像開發板套件 - 第二代 (VEEK-MT2)
- Cyclone IV EP4CE115 with ~114,480 LEs
- 8-Megapixel Digital Image Sensor Module
- 7" LCD Touch Screen Module
|
|

|
DE2i-150 FPGA Development Kit
- Cyclone IV GXP4CGX150F31 device
- Intel®
Atom™ Dual Core Processor N2600( 1M Cache, 1.6GHz )
- Supports Windows & Linux Operation Systems
|
|

|
Altera DE2-115 教育開發平台
- Cyclone IV EP4CE115 with ~114,480 LEs
- 2 Gigabit Ethernet Ports, HSMC connector
- 128MB SDRAM, 2MB SRAM, 8MB Flash
|
|

|
Altera DE0-Nano 開發平台
- Ideal for use with embedded soft processors
- Tiny and robust packaging for portable applications
- Expansion headers for daughter cards, motors, actuators, etc.
|
|

|
Altera Cyclone IV GX FPGA Development Kit
- Cyclone IV GX EP4CGX150N FPGA
- DDR2 SDRAM, SSRAM, flash
- PCIe x4, Gigabit Ethernet, HSMC
|
|
 |
|
|
Cyclone III

|
Altera DE0 多媒體開發平台
- Cyclone III EP3C16F484 with ~16,000 LEs
- 8MB SDRAM and 4MB Flash
- USB Blaster onboard
|
|
 |
|
|
MAX 10

|
T-Core
- MAX 10 10M50DAF484C7G Device
- QSPI Flash, Color LED, ADC and GPIO Header
- Support RISC-V
- USB-Blaster II for programming FPGA
|
|

|
Max 10 Plus
- MAX 10 10M50DAF484C6G with 50K LEs
- DDR3 with ECC, QSPI Flash, MicroSD Socket
- Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC
|
|

|
DE10-Lite Board
- MAX 10 10M50DAF484C7G Device
- Accelerometer and 4-bit Resistor VGA
- 64MB SDRAM, x16 bits data bus
- Arduino UNO R3 and 2x20 GPIO connector
- On-Board USB Blaster (Normal type B USB)
|
|

|
MAX 10 FPGA Development Kit
- Develop designs for the 10M50D, F484 package FPGA
- Measure the performance of the MAX 10 FPGA analog-to-digital block conversion
- Interface MAX 10 FPGAs to DDR3 memory at 300 MHz performance
- Run embedded Linux using the Nios® II processor
|
|

|
Altera MAX 10 FPGA Evaluation Kit
- 晶片:10M08SAE144C8G
- Arduino 擴展槽
- 80個可用的直通 I/O 孔
- 萬用擴展區
|
|

|
MAX 10 NEEK
- MAX 10 10M50DAF484C6G with 50K LEs
- DDR3 with ECC, QSPI Flash, MicroSD Card
- Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC
- 8-Mega pixel color camera and 7" 5-point touch screen
|
|
 |
|

|