DE10-Nano FAQ

From Terasic Wiki

(Difference between revisions)
Jump to: navigation, search
Line 6: Line 6:
#[[DE10-Nano xfce kernel & source code]]  
#[[DE10-Nano xfce kernel & source code]]  
#[[DE10-Nano的OTG口接USB转串口接口板的方法| DE10-Nano的OTG口接USB转串口接口板的方法]]
#[[DE10-Nano的OTG口接USB转串口接口板的方法| DE10-Nano的OTG口接USB转串口接口板的方法]]
 +
#[[How to set static IP for DE10-Nano console image]] [[使用DE10-Nano console image该如何设置静态IP|《使用DE10-Nano console image该如何设置静态IP》]]
[[DE10-Nano TopPage|Back]]
[[DE10-Nano TopPage|Back]]

Revision as of 17:12, 17 May 2018

  1. DE10-Nano heat issue 《DE10-Nano开发板发热问题》
  2. set all MSEL switches to "1" by mistake 《错误地将MSEL开关全设置为“1”》
  3. When running Xfce system, the user's mouse or keyboard doesn't get any response 《运行Xfce桌面系统时,通过OTG接口连接的鼠标或键盘无响应》
  4. After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window 《启动linux后,putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"》
  5. HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file 《运行DE10_Nano_Xfce.img时下载sof会导致HPS重启》
  6. DE10-Nano xfce kernel & source code
  7. DE10-Nano的OTG口接USB转串口接口板的方法
  8. How to set static IP for DE10-Nano console image 《使用DE10-Nano console image该如何设置静态IP》

Back

Personal tools