DE10-Nano FAQ
From Terasic Wiki
(Difference between revisions)
| Line 7: | Line 7: | ||
#[[DE10-Nano的OTG口接USB转串口接口板的方法| 《DE10-Nano的OTG口接USB转串口接口板的方法》]] | #[[DE10-Nano的OTG口接USB转串口接口板的方法| 《DE10-Nano的OTG口接USB转串口接口板的方法》]] | ||
#[[How to set static IP for DE10-Nano console image]] [[使用DE10-Nano console image该如何设置静态IP|《使用DE10-Nano console image该如何设置静态IP》]] | #[[How to set static IP for DE10-Nano console image]] [[使用DE10-Nano console image该如何设置静态IP|《使用DE10-Nano console image该如何设置静态IP》]] | ||
| - | #[[测试[DE10-Nano例程Nios_Access_DDR3问题]] | + | #[[测试[DE10-Nano例程Nios_Access_DDR3问题|《测试[DE10-Nano例程Nios_Access_DDR3问题》]] |
[[DE10-Nano TopPage|Back]] | [[DE10-Nano TopPage|Back]] | ||
Revision as of 10:31, 8 June 2018
- DE10-Nano heat issue 《DE10-Nano开发板发热问题》
- set all MSEL switches to "1" by mistake 《错误地将MSEL开关全设置为“1”》
- When running Xfce system, the user's mouse or keyboard doesn't get any response 《运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应》
- After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window 《启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"》
- HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file 《运行DE10_Nano_Xfce.img时下载sof会导致HPS重启》
- DE10-Nano xfce kernel & source code
- 《DE10-Nano的OTG口接USB转串口接口板的方法》
- How to set static IP for DE10-Nano console image 《使用DE10-Nano console image该如何设置静态IP》
- [[测试[DE10-Nano例程Nios_Access_DDR3问题|《测试[DE10-Nano例程Nios_Access_DDR3问题》]]
