DE10 Advance revC demo: System Requirements
From Terasic Wiki
(Difference between revisions)
Bingxia (Talk | contribs)
(Created page with "Before starting this tutorial, please note that the following items are required to complete the demonstration project: *'''Terasic DE10-Advanced FPGA board, includes''' :*Mini U...")
(Created page with "Before starting this tutorial, please note that the following items are required to complete the demonstration project: *'''Terasic DE10-Advanced FPGA board, includes''' :*Mini U...")
Latest revision as of 16:12, 27 August 2018
Before starting this tutorial, please note that the following items are required to complete the demonstration project:
- Terasic DE10-Advanced FPGA board, includes
- Mini USB Cable for UART terminal
- Micros SD-Card, at 4GB minimum
- Micros SD-Card Card Reader
- A x86 PC
- Windows 10 64 bit operation system Installed
- One USB Port
- Quartus Prime 18.0 or Later Installed
- SoC EDS 18.0 or Later Installed
- Win32 Disk Imager Installed
