|
|
(One intermediate revision not shown) |
Line 1: |
Line 1: |
- | #[[DE10-Nano的每日一问积累|《DE10-Nano每日一问》]] | + | #[[DE10_Nano_FAQ_EN|English]] |
- | #[[DE10-Nano heat issue]] [[DE10-Nano开发板发热问题|《DE10-Nano开发板发热问题》]] | + | #[[DE10_Nano_FAQ_CHS|简体中文(Simplified Chinese)]] |
- | # [[set all MSEL switches to "1" by mistake ]] [[错误地将MSEL开关全设置为“1”|《错误地将MSEL开关全设置为“1”》]] | + | #[[DE10_Nano_FAQ_CHT|繁體中文(Traditional Chinese)]] |
- | # [[When running Xfce system, the user's mouse or keyboard doesn't get any response]] [[运行Xfce桌面系统时,通过OTG接口连接的鼠标或键盘无响应|《运行Xfce桌面系统时,通过OTG接口连接的鼠标或键盘无响应》]]
| + | |
- | # [[After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window]] [[启动linux后,putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"|《启动linux后,putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"》]]
| + | [[DE10_Nano TopPage|back]] |
- | #[[HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file ]][[运行DE10_Nano_Xfce.img时下载sof会导致HPS重启|《运行DE10_Nano_Xfce.img时下载sof会导致HPS重启》]]
| + | |
- | #[[DE10-Nano xfce kernel & source code]]
| + | |
- | #[[DE10-Nano的OTG口接USB转串口接口板的方法| 《DE10-Nano的OTG口接USB转串口接口板的方法》]]
| + | |
- | #[[How to set static IP for DE10-Nano console image]] [[使用DE10-Nano console image该如何设置静态IP|《使用DE10-Nano console image该如何设置静态IP》]]
| + | |
- | #[[测试DE10-Nano例程Nios_Access_DDR3问题|《测试DE10-Nano例程Nios_Access_DDR3问题》]]
| + | |
- | #[[从 HPS Flash Programmer 烧 flash报错|《从 HPS Flash Programmer 烧 flash报错》]]
| + | |
- | #[[DE10-Nnao GPIO 当作串口使用的参考实例|《有没有DE10-Nnao GPIO 当作串口使用的参考实例呢?》]]
| + | |
- | #[[使用systembuilder生成带DDR3的工程直接编译后报错|《使用systembuilder生成带DDR3的工程直接编译后报错的问题》]]
| + | |
- | [[DE10-Nano TopPage|Back]] | + | |