DE10-Nano FAQ
From Terasic Wiki
(Difference between revisions)
| Line 1: | Line 1: | ||
| - | #[[DE10-Nano heat issue]] [[DE10-Nano开发板发热问题| | + | #[[DE10-Nano heat issue]] [[DE10-Nano开发板发热问题|《DE10-Nano开发板发热问题》]] |
| - | # [[set all MSEL switches to "1" by mistake ]] [[错误地将MSEL开关全设置为“1”| | + | # [[set all MSEL switches to "1" by mistake ]] [[错误地将MSEL开关全设置为“1”|《错误地将MSEL开关全设置为“1”》]] |
| - | # [[When running Xfce system, the user's mouse or keyboard doesn't get any response]] [[运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应| | + | # [[When running Xfce system, the user's mouse or keyboard doesn't get any response]] [[运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应|《运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应》]] |
| - | # [[After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window]] [[启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"| | + | # [[After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window]] [[启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"|《启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"]] |
#[[HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file ]][[运行DE10_Nano_Xfce.img时下载sof会导致HPS重启]] | #[[HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file ]][[运行DE10_Nano_Xfce.img时下载sof会导致HPS重启]] | ||
Revision as of 09:54, 14 August 2017
- DE10-Nano heat issue 《DE10-Nano开发板发热问题》
- set all MSEL switches to "1" by mistake 《错误地将MSEL开关全设置为“1”》
- When running Xfce system, the user's mouse or keyboard doesn't get any response 《运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应》
- After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window 《启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"
- HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file 运行DE10_Nano_Xfce.img时下载sof会导致HPS重启
