F2G User Manual
From Terasic Wiki
(Difference between revisions)
(→Chpater1 Introduction) |
(→Chpater1 Introduction) |
||
| Line 1: | Line 1: | ||
= <span style="color:#000080;">Chpater1 Introduction</span> = | = <span style="color:#000080;">Chpater1 Introduction</span> = | ||
| - | The F2G board is designed to convert a '''FPGA Mezzanine Card'''(FMC) or '''FPGA Mezzanine Card Plus'''(FMC+) interface to four | + | The F2G board is designed to convert a '''FPGA Mezzanine Card'''(FMC) or '''FPGA Mezzanine Card Plus'''(FMC+) interface to four 2x20pin expansion prototype(GPIO) connectors, which are compatible with the expansion headers of the Terasic DE-Series board(Such as DE2-115/DE10-Standard). Users can connect up to four GPIO connectors onto a FMC-interfaced host board via a F2G board. |
== 1-1 1-1Features == | == 1-1 1-1Features == | ||
Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed below: | Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed below: | ||
Revision as of 11:06, 11 May 2020
Chpater1 Introduction
The F2G board is designed to convert a FPGA Mezzanine Card(FMC) or FPGA Mezzanine Card Plus(FMC+) interface to four 2x20pin expansion prototype(GPIO) connectors, which are compatible with the expansion headers of the Terasic DE-Series board(Such as DE2-115/DE10-Standard). Users can connect up to four GPIO connectors onto a FMC-interfaced host board via a F2G board.
1-1 1-1Features
Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed below:
- FMC High-Pin Count Interface.
- IO standard is dependent on FMC Voltage of the Mother board.
- Four 2x20 GPIO Headers.
- 2x6 TMD Header.
- SMA Clock Input.
- Button x2.
- SWtich x2.
- LED x2.
