F2G with intel A10GFP
From Terasic Wiki
(Difference between revisions)
| Line 1: | Line 1: | ||
This document will introduce what you need to pay attention to when the Terasic F2G card is connected to Intel Arria® 10 GX FPGA Development Kit. | This document will introduce what you need to pay attention to when the Terasic F2G card is connected to Intel Arria® 10 GX FPGA Development Kit. | ||
| - | + | =GPIO Uisng Status= | |
| + | Due the two FMC connectors FMCA and FMCB on the Arria® 10 GX FPGA Development Kit belong to the low pin count FMC type([https://en.wikipedia.org/wiki/FPGA_Mezzanine_Card#LPC_vs._HPC Note]), after connecting the F2G card, only the two connectors GPIO 0 and GPIO 1 on the F2G card can be used, and the other two GPIO connectors are defined Connected to high pin count FMC pin, so it cannot be used in A10GX dev kit | ||
Revision as of 16:13, 18 June 2020
This document will introduce what you need to pay attention to when the Terasic F2G card is connected to Intel Arria® 10 GX FPGA Development Kit.
GPIO Uisng Status
Due the two FMC connectors FMCA and FMCB on the Arria® 10 GX FPGA Development Kit belong to the low pin count FMC type(Note), after connecting the F2G card, only the two connectors GPIO 0 and GPIO 1 on the F2G card can be used, and the other two GPIO connectors are defined Connected to high pin count FMC pin, so it cannot be used in A10GX dev kit
