F2G with intel A10GFP
From Terasic Wiki
(Difference between revisions)
(→GPIO Uisng Status) |
|||
| Line 2: | Line 2: | ||
=GPIO Uisng Status= | =GPIO Uisng Status= | ||
| - | Due the two FMC connectors FMCA and FMCB on the Arria® 10 GX FPGA Development Kit belong to the low pin count FMC type([https://en.wikipedia.org/wiki/FPGA_Mezzanine_Card#LPC_vs._HPC Note]), after connecting the F2G card, only the two connectors GPIO 0 and GPIO 1 on the F2G card can be used, and the other two GPIO connectors are defined Connected to high pin count FMC pin, so it cannot be used in A10GX dev kit | + | Due the two FMC connectors FMCA and FMCB on the Arria® 10 GX FPGA Development Kit belong to the low pin count FMC type([https://en.wikipedia.org/wiki/FPGA_Mezzanine_Card#LPC_vs._HPC Note]), after connecting the F2G card, only the two connectors '''GPIO 0''' and '''GPIO 1''' on the F2G card can be used, and the other two GPIO connectors are defined Connected to high pin count FMC pin, so it cannot be used in A10GX dev kit |
Revision as of 16:23, 18 June 2020
This document will introduce what you need to pay attention to when the Terasic F2G card is connected to Intel Arria® 10 GX FPGA Development Kit.
GPIO Uisng Status
Due the two FMC connectors FMCA and FMCB on the Arria® 10 GX FPGA Development Kit belong to the low pin count FMC type(Note), after connecting the F2G card, only the two connectors GPIO 0 and GPIO 1 on the F2G card can be used, and the other two GPIO connectors are defined Connected to high pin count FMC pin, so it cannot be used in A10GX dev kit
