DE10-Nano FAQ
From Terasic Wiki
- 《DE10-Nano每日一问》
- DE10-Nano heat issue 《DE10-Nano开发板发热问题》
- set all MSEL switches to "1" by mistake 《错误地将MSEL开关全设置为“1”》
- When running Xfce system, the user's mouse or keyboard doesn't get any response 《运行Xfce桌面系统时,通过OTG接口连接的鼠标或键盘无响应》
- After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window 《启动linux后,putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"》
- HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file 《运行DE10_Nano_Xfce.img时下载sof会导致HPS重启》
- DE10-Nano xfce kernel & source code
- 《DE10-Nano的OTG口接USB转串口接口板的方法》
- How to set static IP for DE10-Nano console image 《使用DE10-Nano console image该如何设置静态IP》
- 《测试DE10-Nano例程Nios_Access_DDR3问题》
- 《从 HPS Flash Programmer 烧 flash报错》
- 《有没有DE10-Nnao GPIO 当作串口使用的参考实例呢?》
- 《使用systembuilder生成带DDR3的工程直接编译后报错的问题》