Cyclone V SX SoC Development Board

SoC Embedded Design Suite Subscription Edition

• ARM Development Studio 5 (DS-5™) Altera Edition Toolkit
• Hardware-to-software handoff tools
• Linux run-time software for application development
• SoC hardware libraries for firmware development
• Application example

Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)

• 110K LEs, 41509 ALMs
• 5140 M10K memory blocks
• 224 18x18 Multiplier
• 6 FPGA PLLs and 3 HPS PLLs

Configuration Device and USB Blaster Circuit

• Active Serial (AS) x1 or x4 configuration (EPCQ256SI16N)
• MAX® V CPLD (5M2210ZF256I5N) in a 256-pin FBGA package as the System Controller
• Flash fast passive parallel (FPP) configuration
• MAX II CPLD (EPM570GM100) as part of the embedded USB-BlasterTM II for use with the Quartus® II Programmer

Memory Devices

• One 1,024-Mbyte (MB) HPS DDR3 SDRAM with error correction code (ECC) support
• One 1,024-MB FPGA DDR3 SDRAM
• One 256-Megabit (Mb) quad serial peripheral interface (QSPI) flash
• One 512-Mb CFI flash
• One 32-Kb I2C serial electrically erasable PROM (EEPROM)
• One Micro SD flash memory card

Switches and Indicators

• LEDs and displays
  • Eight user LEDs
  • One configuration load LED
  • One configuration done LED
  • One error LED
  • Three configuration select LEDs
  • Four on-board USB-Blaster II status LEDs
  • One HSMC interface LED
  • Two UART data transmit and receive LEDs
  • One power on LED
  • One two-line character LCD display
• Push buttons
  • One CPU reset push button
  • One MAX V reset push button
  • One program select push button
  • One program configuration push button
  • Six general user push buttons
• DIP switches
  • One MAX V CPLD System Controller control switch
  • One JTAG chain control DIP switch
  • One mode select DIP switch
  • One general user DIP switch

On-board Clocking Circuitry

• Si570, Si571, and Si5338 programmable oscillators
• 25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz oscillators
• SMA input (LVCMOS)

Communication Ports

• One PCI Express x4 Gen1 socket
• One universal HSMC port
• One USB 2.0 on-the-go (OTG) port
• One Gigabit Ethernet port
• Dual 10/100 Ethernet ports
• One SDI port (option for SMA connection)
• One controller area network (CAN) port
• One RS-232 UART (through the mini-USB port)
• One real-time clock

Power

• 14–20-V (laptop) DC input

Mechanical

• 5.2" × 8.2" rectangular form factor

Capacitive LCD Touch Screen

• Equipped with an 7-inch Amorphous-TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
• Module composed of LED backlight
• Support 24-bit parallel RGB interface
• Converting the X/Y coordination of touch point to its corresponding digital data via the Touch controller

5-Megapixel Digital Image Sensor

• Superior low-light performance
• High frame rate
• Global reset release, which starts the exposure of all rows simultaneously
• Bulb exposure mode, for arbitrary exposure times
• Snapshot-mode to take frames on demand
• Horizontal and vertical mirror image
• Column and row skip modes to reduce image size without reducing field-of-view
• Column and row binning modes to improve image quality when resizing
• Simple two-wire serial interface
• Programmable controls: gain, frame rate, frame size, exposure

Digital Accelerometer

• Up to 13-bit resolution at +/- 16g
• SPI (3- and 4-wire) digital interface
• Flexible interrupts modes

Ambient Light Sensor

• Approximates human-eye response
• Precise luminance measurement under diverse lighting conditions
• Programmable interrupt function with user-defined upper and lower threshold settings
• 16-bit digital output with I2C fast-mode at 400 kHz
• Programmable analog gain and integration time
• 50/60-Hz lighting ripple rejection