Terasic News Labs Our Company Products Turnkey Solutions Training FAQ
Cart
 
   
 
SoC Platform Cyclone VEEK-MT2-C5SoC
 





VEEK-MT2-C5SoC

VEEK-MT2-C5SoC

Cyclone V SX SoC Development Board

SoC Embedded Design Suite Subscription Edition

  • ARM Development Studio 5 (DS-5™) Intel Edition Toolkit

  • Hardware-to-software handoff tools

  • Linux run-time software for application development

  • SoC hardware libraries for firmware development

  • Application example

Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)

  • 110K LEs, 41509 ALMs

  • 5140 M10K memory blocks

  • 224 18x18 Multipliers

  • 6 FPGA PLLs and 3 HPS PLLs

Configuration Device and USB Blaster Circuit

  • Active Serial (AS) x1 or x4 configuration (EPCQ256SI16N)

  • MAX® V CPLD (5M2210ZF256I5N) in a 256-pin FBGA package as the System Controller

  • Flash Fast Passive Parallel (FPP) configuration

  • MAX II CPLD (EPM570GM100) as part of the embedded USB-BlasterTM II for use with the Quartus® II Programmer

Memory Devices

  • One 1,024-Mbyte (MB) HPS DDR3 SDRAM with Error Correction Code (ECC) support

  • One 1,024-MB FPGA DDR3 SDRAM

  • One 256-Megabit (Mb) quad serial peripheral interface (QSPI) Flash

  • One 512-Mb CFI Flash

  • One 32-Kb I2C serial Electrically Erasable PROM (EEPROM)

  • One microSD flash memory card

Switches and Indicators

  • LEDs and displays

    • Eight user LEDs

    • One configuration load LED

    • One configuration done LED

    • One error LED

    • Three configuration select LEDs

    • Four on-board USB-Blaster II status LEDs

    • One HSMC interface LED

    • Two UART data transmit and receive LEDs

    • One power on LED

    • One two-line character LCD display

  • Push buttons

    • One CPU reset push button

    • One MAX V reset push button

    • One program select push button

    • One program configuration push button

    • Six general user push buttons

  • DIP switches

    • One MAX V CPLD System Controller control switch

    • One JTAG chain control DIP switch

    • One mode select DIP switch

    • One general user DIP switch

On-board Clocking Circuitry

  • Si570, Si571, and Si5338 programmable oscillators

  • 25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz oscillators

  • SMA input (LVCMOS)

Communication Ports

  • One PCI Express x4 Gen1 socket

  • One universal HSMC port

  • One USB 2.0 on-the-go (OTG) port

  • One Gigabit Ethernet port

  • Dual 10/100 Ethernet ports

  • One SDI port (option for SMA connection)

  • One controller area network (CAN) port

  • One RS-232 UART (through the mini-USB port)

  • One real-time clock

Power

  • 14-20 V (laptop) DC input

Mechanical

  • 5.2" × 8.2" rectangular form factor

Capacitive LCD Multi-touch Screen

  • 7-inch TFT LCD with pixel resolution of 800*480
  • 16 million colors (24-bit RGB)
  • LED backlight
  • 5-point capacitive touch

8-Megapixel Digital Image Sensor

  • 3,264H x 2,448V active pixels with Bayer color arrangement
  • Programmable frame rate up to 60FPS (1408X792)
  • Sensitivity 940mV/Lux-sec
  • Voice Coil Motor for focus control

Ambient Light Sensor

  • Precise illumination measurement under diverse lighting conditions
  • Programmable interrupts
  • 16-bit digital output with I2C fast-mode at 400 kHz
  • Programmable analog gain and integration time
  • 50/60Hz lighting ripple rejection

MPU9250 Nine-Axis Sensors

Accelerometer Features

  • Digital-output triple-axis accelerometer
  • Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
  • Self-test

Gyroscope Features

  • Digital-output X-, Y-, and Z-Axis angular rate sensors
  • User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
  • Self-test

Magnetometer

  • 3-axis silicon monolithic hall-effect magnetic sensor with magnetic concentrator
  • Wide dynamic measurement range and high resolution with lower current consumption
  • Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
  • Full scale measurement range is ±4800μT
  • Magnetometer normal operating current: 280μA at 8Hz repetition rate
  • Self-test function with internal magnetic source to confirm magnetic sensor operation on end products

 



Overview Layout
Terasic News Labs | Our Company | Products | Turnkey Solutions | Training | FAQ | Contact Us | Forum | Facebook | YouTube