From Terasic Wiki

Contents 1 How to Find the Agilex 7 FPGA Starter Kit Revision? 2 Board Revision Details 2.1 Version A to Version B 2.2 Version B to Version C

How to Find the Agilex 7 FPGA Starter Kit Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.

As shown in the figure below, if the letter inside the red circle is "A", it means that the PCB version is Rev.A.

Board Revision Details

Version A to Version B

1. Change FPGA to mass production version (AGFB027R24C2E2V)

2. LTC3888 2x3 header (J8) is changed from 2x3 to 1x3, and the position is also moved.

   

   

3. The mechanism of some connectors has slight displacement, such as Micro SD card, Ethernet and HDMI.

   

Version B to Version C

1. Change FPGA device from AGFB027R24C2E2V (F-Tile B2) to AGFB027R24C2E2VB (F-Tile C0).
2. Add a clock buffer for PCIe CLK .