DE10-Advance Hardware Manual revC Chapter5 Gigabit Ethernet
From Terasic Wiki
5.2 Gigabit Ethernet
The board supports Gigabit Ethernet transfer by an external Micrel KSZ9031RNX PHY chip and HPS Ethernet MAC function. The KSZ9031RNX chip with integrated 10/100/1000 Mbps Gigabit Ethernet transceiver also supports RGMII MAC interface. Figure 5-1 shows the connections between the HPS, Gigabit Ethernet PHY, and RJ-45 connector. The pin assignment associated with Gigabit Ethernet interface is listed in Table 5-2. More information about the KSZ9031RNX PHY chip and its datasheet, as well as the application notes, is available on the manufacturer’s website.
- Signal Name - FPGA Pin Number - Description - I/O Standard - HPS_ENET_GTX_CLK - PIN_F25 - GMII Transmit Clock - 1.8V - HPS_ENET_MDC - PIN_D24 - Management Data Clock Reference - 1.8V - HPS_ENET_MDIO - PIN_C24 - Management Data - 1.8V - HPS_ENET_RX_CLK - PIN_K22 - GMII and MII receive clock - 1.8V - HPS_ENET_RX_DATA[0] - PIN_H23 - GMII and MII receive data[0] - 1.8V - HPS_ENET_RX_DATA[1] - PIN_J23 - GMII and MII receive data[1] - 1.8V - HPS_ENET_RX_DATA[2] - PIN_F24 - GMII and MII receive data[2] - 1.8V - HPS_ENET_RX_DATA[3] - PIN_G24 - GMII and MII receive data[3] - 1.8V - HPS_ENET_RX_DV - PIN_L22 - GMII and MII receive data valid - 1.8V - HPS_ENET_TX_DATA[0] - PIN_H24 - MII transmit data[0] - 1.8V - HPS_ENET_TX_DATA[1] - PIN_J24 - MII transmit data[1] - 1.8V - HPS_ENET_TX_DATA[2] - PIN_M22 - MII transmit data[2] - 1.8V - HPS_ENET_TX_DATA[3] - PIN_M21 - MII transmit data[3] - 1.8V - HPS_ENET_TX_EN - PIN_G25 - GMII and MII transmit enable - 1.8V 
There are four LEDs, two green LEDs(LEDG) and two yellow LEDs(LEDY), which represent the status of Ethernet PHY (KSZ9031RNX). The LED control signals are connected to the LEDs on the RJ45 connector. The state and definition of LEDG and LEDY are listed in Table 5-3. For instance, the connection from board to Gigabit Ethernet is established once the LEDG lights on.
- Table 5-3 State and Definition of LED Mode Pins
 
 
- LED (State) - LED (Definition) - Link /Activity - LEDG - LEDY - LEDG - LEDY - H - H - OFF - OFF - Link off - L - H - ON - OFF - 1000 Link / No Activity - Toggle - H - Blinking - OFF - 1000 Link / Activity (RX, TX) - H - L - OFF - ON - 100 Link / No Activity - H - Toggle - OFF - Blinking - 100 Link / Activity (RX, TX) - L - L - ON - ON - 10 Link/ No Activity - Toggle - Toggle - Blinking - Blinking - 10 Link / Activity (RX, TX) 

