Full Mode

From Terasic Wiki

Jump to: navigation, search

How to make CLR daughter card to support the full mode

  • First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.
  • Second, equip some neccessary ICs into the board for the full mode:

CLR FULL.png

We do make the modification onto the CLR-HSMC card for the full mode support for another customer either. And it works in Full mode with 8 Taps (8x8bits) with good stability. It works well with the MC3010 high speed camera at the data rate of 680MB/s. But this card cannot support full CameraLink with 10 Taps (10x8bits). Because there are not enough pins on the HSMC port of the CLR_HSMC card to support 10 Taps (16 additional IO pins needed).
Retrieved from "http://www.terasic.com.tw/wiki/Full_Mode"
Personal tools