F2G User Manual

From Terasic Wiki

(Difference between revisions)
Jump to: navigation, search
(Chpater1 Introduction)
(1-1 1-1Features)
Line 1: Line 1:
=                <span style="color:#000080;">Chpater1 Introduction</span> =
=                <span style="color:#000080;">Chpater1 Introduction</span> =
The F2G board is designed to convert a '''FPGA Mezzanine Card'''(FMC) or  '''FPGA Mezzanine Card Plus'''(FMC+) interface to four 2x20pin expansion prototype(GPIO) connectors, which are compatible with the expansion headers of the Terasic DE-Series board(Such as DE2-115/DE10-Standard). Users can connect up to four GPIO connectors onto a FMC-interfaced host board via a F2G board.
The F2G board is designed to convert a '''FPGA Mezzanine Card'''(FMC) or  '''FPGA Mezzanine Card Plus'''(FMC+) interface to four 2x20pin expansion prototype(GPIO) connectors, which are compatible with the expansion headers of the Terasic DE-Series board(Such as DE2-115/DE10-Standard). Users can connect up to four GPIO connectors onto a FMC-interfaced host board via a F2G board.
-
== 1-1 1-1Features ==
+
== 1-1 Features ==
Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed  below:
Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed  below:
*FMC High-Pin Count Interface.
*FMC High-Pin Count Interface.

Revision as of 11:07, 11 May 2020

Chpater1 Introduction

The F2G board is designed to convert a FPGA Mezzanine Card(FMC) or FPGA Mezzanine Card Plus(FMC+) interface to four 2x20pin expansion prototype(GPIO) connectors, which are compatible with the expansion headers of the Terasic DE-Series board(Such as DE2-115/DE10-Standard). Users can connect up to four GPIO connectors onto a FMC-interfaced host board via a F2G board.

1-1 Features

Figure 1.1 shows the photo of a F2G board. The important functions of the F2G are listed below:

  • FMC High-Pin Count Interface.
  • IO standard is dependent on FMC Voltage of the Mother board.
  • Four 2x20 GPIO Headers.
  • 2x6 TMD Header.
  • SMA Clock Input.
  • Button x2.
  • SWtich x2.
  • LED x2.
Personal tools