From Terasic Wiki

Revision as of 10:43, 22 June 2018 (view source) Admin (Talk | contribs) (→3.1.2 Mode Select Switches) ← Older edit		Revision as of 10:44, 22 June 2018 (view source) Admin (Talk | contribs) (→3.2 Board Setting Headers) Newer edit →
Line 13:		Line 13:
	==3.2 Board Setting Headers==		==3.2 Board Setting Headers==
-	=== 3.2.1 JTAG Interface Header ===	+	===3.2.1 JTAG Interface Header===
-		+
	===3.2.2 FMC_VCCIO Select Header===		===3.2.2 FMC_VCCIO Select Header===
	===3.2.3 DDR4 VCCIO Select Header===		===3.2.3 DDR4 VCCIO Select Header===

---

Revision as of 10:44, 22 June 2018

Contents 1 Chapter 1 DE10-Advanced Development Kit 1.1 1.1 Package Contents 1.2 1.2 DE10-Advanced System CD 1.3 1.3 Getting Help 2 Chapter 2 Introduction of the DE10-Advanced Board 2.1 2.1 Layout and Components 2.2 2.2 Block Diagram of the DE10-Advanced Board 3 3 Chapter 3 Board Setting and Status component 3.1 3.1 Board Setting Switches 3.1.1 3.1.1 USB Type C Connector Setting Switches 3.1.2 3.1.2 Mode Select Switches 3.2 3.2 Board Setting Headers 3.2.1 3.2.1 JTAG Interface Header 3.2.2 3.2.2 FMC_VCCIO Select Header 3.2.3 3.2.3 DDR4 VCCIO Select Header 3.2.4 3.2.4 External USB Blaster Header 3.3 3.3 Status LED 3.3.1 3.3.1 System MAX 3.3.2 3.3.2 UART Interface 3.3.3 3.3.3 SFP Interface 3.3.4 3.3.4 Ethernet Interface 3.3.5 3.3.5 Power 3.4 3.4 JTAG Interface 4 Chapter 4 FPGA Fabric component 4.1 4.1 USB Type C Port 4.2 4.2 Display Port 4.3 4.3 SFP+ Connector 4.4 4.4 SATA 4.5 4.5 PCIe 4.6 4.6 DDR4 SO-DIMM Socket 4.7 4.7 HDMI TX 4.8 4.8 HDMI RX 4.9 4.9 Gigabit Ethernet 4.10 4.10 FMC Connector 4.11 4.11 Temperature Sensor,Fan Control and Power Monitor 4.12 4.11 User Interface (LED/7-SEG/Button/Switch) 5 Chapter 5 HPS Fabric Component 5.1 5.1 User Push-buttons and LEDs 5.2 5.2 Gigabit Ethernet 5.3 5.3 UART to USB 5.4 5.4 Micro SD Card Socket 5.5 5.5 USB OTG 6 Chapter 6 System Clocks 7 Chapter 7 Power and Reset 7.1 7.1 Power Supply 7.2 7.2 Power Tree 7.3 7.3 Reset 7.3.1 7.3.1 HPS Reset 7.3.2 7.3.2 PCIe Reset 7.3.3 7.3.3 MAX V Reset 7.3.4 7.3.4 HPS USB Reset

Chapter 1 DE10-Advanced Development Kit

1.1 Package Contents

1.2 DE10-Advanced System CD

1.3 Getting Help

Chapter 2 Introduction of the DE10-Advanced Board

2.1 Layout and Components

2.2 Block Diagram of the DE10-Advanced Board

3 Chapter 3 Board Setting and Status component

3.1 Board Setting Switches

3.1.1 USB Type C Connector Setting Switches

3.1.2 Mode Select Switches

3.2 Board Setting Headers

3.2.1 JTAG Interface Header

3.2.2 FMC_VCCIO Select Header

3.2.3 DDR4 VCCIO Select Header

3.2.4 External USB Blaster Header

3.3 Status LED

3.3.1 System MAX

3.3.2 UART Interface

3.3.3 SFP Interface

3.3.4 Ethernet Interface

3.3.5 Power

3.4 JTAG Interface

Chapter 4 FPGA Fabric component

4.1 USB Type C Port

4.2 Display Port

4.3 SFP+ Connector

4.4 SATA

4.5 PCIe

4.6 DDR4 SO-DIMM Socket

4.7 HDMI TX

4.8 HDMI RX

4.9 Gigabit Ethernet

4.10 FMC Connector

4.11 Temperature Sensor,Fan Control and Power Monitor

4.11 User Interface (LED/7-SEG/Button/Switch)

Chapter 5 HPS Fabric Component

5.1 User Push-buttons and LEDs

5.2 Gigabit Ethernet

5.3 UART to USB

5.4 Micro SD Card Socket

5.5 USB OTG

Chapter 6 System Clocks

Chapter 7 Power and Reset

7.1 Power Supply

7.2 Power Tree

7.3 Reset

7.3.1 HPS Reset

7.3.2 PCIe Reset

7.3.3 MAX V Reset

7.3.4 HPS USB Reset