DE10 Nano FAQ CHS

From Terasic Wiki

Revision as of 16:50, 5 November 2024 by Dongliu (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  1. 《DE10-Nano每日一问》
  2. DE10-Nano heat issue 《DE10-Nano开发板发热问题》
  3. set all MSEL switches to "1" by mistake 《错误地将MSEL开关全设置为“1”》
  4. When running Xfce system, the user's mouse or keyboard doesn't get any response 《运行Xfce桌面系统时，通过OTG接口连接的鼠标或键盘无响应》
  5. After booting linux, it reports"usb usb1-port: Can't enable. Maybe the USB cable is bad?" in the putty window 《启动linux后，putty窗口出现 "usb usb1-port: Can't enable. Maybe the USB cable is bad?"》
  6. HPS resets when running DE10_Nano_Xfce.img and comfiguring a sof file 《运行DE10_Nano_Xfce.img时下载sof会导致HPS重启》
  7. DE10-Nano xfce kernel & source code
  8. 《DE10-Nano的OTG口接USB转串口接口板的方法》
  9. How to set static IP for DE10-Nano console image 《使用DE10-Nano console image该如何设置静态IP》
  10. 《测试DE10-Nano例程Nios_Access_DDR3问题》
  11. 《从 HPS Flash Programmer 烧 flash报错》
  12. 《有没有DE10-Nnao GPIO 当作串口使用的参考实例呢？》
  13. 《使用systembuilder生成带DDR3的工程直接编译后报错的问题》
  14. 参考DE10-NANO_OpenCL_18.1.pdf编译aocx文件时报错top.sof文件没有生成

Back

Retrieved from "http://www.terasic.com.tw/wiki/DE10_Nano_FAQ_CHS"
Personal tools