DE10-Advance Hardware Manual revC Chapter5 GPIO Header

From Terasic Wiki

Revision as of 19:46, 29 August 2018 by Admin (Talk | contribs)
Jump to: navigation, search

5.6 GPIO Header

There is a 2x5 pin header(2.54mm) on the DE10-Advanced which connected to six FPGA HPS farbric GPIOs.These I/Os can be used as GPIO that are directly controlled by HPS. Or it can be used as SPI interface (HPS_DIO[11:8]), using the SPI master controller in HPS to communicate with other SPI devices.


De10-advanced revc msel asmode hps gpio sch.jpg

Back

Personal tools