DE10-Advance Getting Start Guide revC

From Terasic Wiki

Revision as of 10:38, 30 August 2018 by Bingxia (Talk | contribs)
Jump to: navigation, search

Contents

[hide]

Chapter 1 About this guide

The DE10-Advanced Getting Started Guide contains a quick overview of the hardware and software setup including step-by-step procedures from installing the necessary software tools to using the DE10-Advanced board. The main topics in this guide covers are listed below:

  • Development Board Setup: Powering on the DE10-Advanced
  • Software Installation: Installing Quartus Prime and SoC EDS
  • Perform a FPGA System Test: Downloading a FPGA SRAM Object File (.sof)
  • Running Linux on DE10- Advanced board via UART terminal

Chapter 2 Development Board Setup

Chapter 3 Software Installation

Chapter 4 Performing a FPGA System Test

Chapter 5 Running Linux on the DE10-Advanced board via UART Terminal

Retrieved from "http://www.terasic.com.tw/wiki/DE10-Advance_Getting_Start_Guide_revC"
Personal tools