Full Mode

From Terasic Wiki

Revision as of 17:03, 17 April 2017 by Wyzhou (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

! How to make CLR daughter card to support the full mode

  1. First of all, there are some of the ICs on board, such as U4 U5 RN4, need to be removed. Because they are used for supporting the Base 2 mode controlling, and they take the bus of the ICs for supporting the full mode.

Second, equip some neccessary ICs into the board for the full mode:

CLR FULL.png

Retrieved from "http://www.terasic.com.tw/wiki/Full_Mode"
Personal tools