Revision as of 10:47, 26 February 2024

How to Find the Agilex 7 FPGA Starter Kit Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.

As shown in the figure below, if the letter inside the red circle is "A", it means that the PCB version is Rev.A.

Change FPGA part number form the AGIB027R29A1E2VB (Rev. A) to AGIB027R29A1E2VC(Rev. B)
Chagne the silk screen of the SW6, modify "0' and "1".
Move MCIO xcvr pin from the bank 15A to 15C of the FPGA.

@@ Line 11: / Line 11: @@
 =Board Revision Details=
 == Version A to Version B ==
-# Change FPGA to mass production version ('''AGFB027R24C2E2V''')
+# Change FPGA part number form the AGIB027R29A1E2VB (Rev. A) to AGIB027R29A1E2VC(Rev. B)
 #:
-# LTC3888 2x3 header (J8) is changed from 2x3 to 1x3, and the position is also moved.
+# Chagne the silk screen of the SW6, modify "0' and "1".
-#: [[File:A7sk change01.png|800px]]
+#: [[File:Ma27 version 01.png|300px]]
-#: [[File:A7sk change02.png|800px]]
 #:
-# The mechanism of some connectors has slight displacement, such as Micro SD card, Ethernet and HDMI.
+# Move MCIO xcvr pin from the bank 15A to 15C of the FPGA.
-#: [[File:A7sk change03.png|800px]]