Revision as of 10:51, 26 February 2024

How to Find the Agilex 7 FPGA Starter Kit Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.

As shown in the figure below, if the letter inside the red circle is "A", it means that the PCB version is Rev.A.

Change FPGA to mass production version (AGFB027R24C2E2V)
LTC3888 2x3 header (J8) is changed from 2x3 to 1x3, and the position is also moved.
The mechanism of some connectors has slight displacement, such as Micro SD card, Ethernet and HDMI.

@@ Line 11: / Line 11: @@
 =Board Revision Details=
 == Version A to Version B ==
-# Change FPGA part number form the AGIB027R29A1E2VB (Rev. A) to AGIB027R29A1E2VC(Rev. B)
+# Change FPGA to mass production version ('''AGFB027R24C2E2V''')
 #:
-# Chagne the silk screen of the SW6, modify "0' and "1".
+# LTC3888 2x3 header (J8) is changed from 2x3 to 1x3, and the position is also moved.
-#: [[File:Ma27 version 01.png|300px]]
+#: [[File:A7sk change01.png|800px]]
+#: [[File:A7sk change02.png|800px]]
 #:
-# Move MCIO xcvr pin from the bank 15A to 15C of the FPGA.
+# The mechanism of some connectors has slight displacement, such as Micro SD card, Ethernet and HDMI.
+#: [[File:A7sk change03.png|800px]]