A7SK Board Revision Document

From Terasic Wiki

Revision as of 14:31, 19 February 2024 by Admin (Talk | contribs)
Jump to: navigation, search

How to Find the Agilex 7 FPGA Starter Kit Revision?

On the bottom view of the PCB, there is a seal mark for the board hardware version.


As shown in the figure below, if the letter inside the red circle is "A", it means that the PCB version is Rev.A.

A7SK version.png

Board Revision Details

Version A to Version B

  1. Change FPGA to mass production version (AGFB027R24C2E2V)
  2. LTC3888 2x3 header (J8) is changed from 2x3 to 1x3, and the position is also moved.
Retrieved from "http://www.terasic.com.tw/wiki/A7SK_Board_Revision_Document"