Apollo S10 SoM Setup Thunderbolt3 connection win10

From Terasic Wiki

Revision as of 20:17, 11 April 2020 by Admin (Talk | contribs)
Jump to: navigation, search

This document will detail how to set up the Thunderbult 3 connection under Win10.

For First Time Connection

  1. When a Host PC with a Win10 operating system is first connected to Thunderbolt 3 deivce, the Device Manager in Win10 will find an unknown device called Base System Device.
    TBT3 01.png
  2. If your computer is connected to a network, win10 will automatically download and install the driver. After installation, the System devices in the Device Manager will appear as Thunderbolt(TM) controller.
    TBT3 02.png
Retrieved from "http://www.terasic.com.tw/wiki/Apollo_S10_SoM_Setup_Thunderbolt3_connection_win10"