DE10 Advance revC demo: Linux LXDE VNC Desktop BSP
From Terasic Wiki
(Difference between revisions)
(Created page with "This is a VNC mode Linux BSP. The console content is displayed on the UART Terminal in your Host PC and the Desktop is displayed on VNC Client. Refer to Table 6-1 for Linux LXDE ...") |
|||
Line 19: | Line 19: | ||
|BSP Feature ||USB Audio Dongle driver <br/> USB WiFi Dongle driver <br/> Example Codes | |BSP Feature ||USB Audio Dongle driver <br/> USB WiFi Dongle driver <br/> Example Codes | ||
|- | |- | ||
- | |Linux Kernel Source||Source: https://github.com/terasic/linux-socfpga <br/> Branch: socfpga-4.5 <br/> Under below: <br/> | + | |Linux Kernel Source||Source: https://github.com/terasic/linux-socfpga <br/> Branch: socfpga-4.5 <br/> Under below location: <br/> Configure File: de10_advanced_vnc.config <br/> DTS File: arch/arm/boot/dts/de10_advanced_vnc.dts |
|} | |} | ||
'''[[DE10-Advance_Demonstration_Manual_revC#Chapter 6 Linux BSP|Back]]''' | '''[[DE10-Advance_Demonstration_Manual_revC#Chapter 6 Linux BSP|Back]]''' |
Revision as of 14:09, 3 September 2018
This is a VNC mode Linux BSP. The console content is displayed on the UART Terminal in your Host PC and the Desktop is displayed on VNC Client. Refer to Table 6-1 for Linux LXDE VNC Desktop BSP information.
- Table 6-1 Linux LXDE VNC Desktop BSP Information
Item Description BSP Location DE10-Advanced_VNC_Desktop.zip
Download link: http://de10-advanced.terasic.com/cdMicroSD Card 4GB at minimal MSEL[2:0] 000 Account User name: root, password is not required (press Enter) UART Terminal Baud rate: 115200
Data bits: 8
Parity: None
Stop Bits: 1
Flow Control: noQuartus Project de10_advanced_ghrd BSP Feature USB Audio Dongle driver
USB WiFi Dongle driver
Example CodesLinux Kernel Source Source: https://github.com/terasic/linux-socfpga
Branch: socfpga-4.5
Under below location:
Configure File: de10_advanced_vnc.config
DTS File: arch/arm/boot/dts/de10_advanced_vnc.dts